Allicdata Part #: | P47W-2TR-ND |
Manufacturer Part#: |
ERG-2SJ470A |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 47 OHM 2W 5% AXIAL |
More Detail: | 47 Ohms ±5% 2W Through Hole Resistor Axial Flame P... |
DataSheet: | ERG-2SJ470A Datasheet/PDF |
Quantity: | 3000 |
3000 +: | $ 0.02176 |
6000 +: | $ 0.01978 |
15000 +: | $ 0.01846 |
30000 +: | $ 0.01754 |
75000 +: | $ 0.01718 |
150000 +: | $ 0.01681 |
Series: | ERG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 47 Ohms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are an indispensable part of electronic circuits, widely used in a variety of fields. Therefore, its range of applications and the principles of operation vary widely. A typical through hole resistor is the ERG-2SJ470A, a 471K ohm resistor with a tolerence of +/-5%.
The ERG-2SJ470A is a chip resistor with a range of applications including voltage divider circuits, power amplifiers, and thermometers. Its size also makes it ideal for applications where components need to fit into smaller spaces, such as cell phone circuits. In larger applications, such as industrial machinery, it can be used for voltage regulation and power regulation.
The working principles of the ERG-2SJ470A involve the production of resistance. It does this by the combination of two primary materials: ceramic and metal. The ceramic element is manufactured using a mold, while the metal element is typically made of silver or alloy, then combined with the ceramic element in a particular ratio. The two materials are highly conductive, thus allowing electricity to flow freely between them. However, the metals have a higher resistance than the ceramic, thus creating a resistance when electricity is passed through.
Another factor in the working principle of the ERG-2SJ470A is the fact that the two materials are not perfectly matched in terms of resistivity. In other words, the metal has a higher resistivity than the ceramic, meaning it provides more resistance than the ceramic element. This is what creates the resistor’s “resistance” measure. The greater the difference between the resistivity of the two materials, the greater the resistance.
In addition, different temperature ranges can affect the resistance value. In general, it is known that as temperatures increase, the resistance value decreases. This is due to the fact that the two materials, ceramic and metal, expand at different rates when exposed to heat, thus affecting the resistance value of the resistor. However, this is a relatively minor effect.
The ERG-2SJ470A has an excellent performance and reliability and is widely used in a wide variety of different electronics applications. Its combination of low cost and high performance make it an ideal choice for many projects, and its versatility allow it to be used in many different applications. With its many advantages, it is no wonder that the ERG-2SJ470A is so popular.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...