ERG-2SJ471V Resistors |
|
Allicdata Part #: | P470W-2TB-ND |
Manufacturer Part#: |
ERG-2SJ471V |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 470 OHM 2W 5% AXIAL |
More Detail: | 470 Ohms ±5% 2W Through Hole Resistor Axial Flame ... |
DataSheet: | ERG-2SJ471V Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.02300 |
2000 +: | $ 0.02109 |
5000 +: | $ 0.01917 |
10000 +: | $ 0.01789 |
25000 +: | $ 0.01700 |
50000 +: | $ 0.01665 |
100000 +: | $ 0.01629 |
Series: | ERG |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Resistance: | 470 Ohms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are electrical components, typically consisting of a ceramic or glass rod, two wires or metal plates, and a resistive material such as carbon, graphite, or metal contact plates. These components are designed to provide resistance in the presence of an applied voltage or current. Through hole resistors can also be thought of as “variable resistors” that can be adjusted in order to change the amount of resistance they provide to the circuit. In this way, through hole resistors can act as limiters for signals, or be used to adjust the voltage or current applied to a circuit.
ERG-2SJ471V is a through hole resistor which is suitable for a variety of applications. The resistor\'s construction is made up of flame-retardant resistant resin, an internal core made from high-stability metal (nickel-chromium) with a high dielectric strength, and an outer shell made from ceramic. The layers of the resistor create a shell that is highly insulated to protect it from any kind of damage, while also allowing the resistor to remain lightweight and easy to install. With its thick construction and high insulation capabilities, the ERG-2SJ471V is able to withstand up to 471 volts and 2 watts of power.
The ERG-2SJ471V can be used to control the current and voltage applied in a variety of applications. It is often used as a safety measure in high-voltage circuits such as those found in lighting systems, power supplies, and air conditioning systems. The resistor can also be used in telecommunications equipment, computers, medical equipment, control systems, and other electronics where high resistance values are needed. The resistor\'s thick insulation also means that it can reduce the risk of short-circuiting, making it a great choice for high-voltage applications.
The ERG-2SJ471V follows the principle of Ohm\'s law, which states that the current flowing through a resistor is directly proportional to the voltage applied to it. This relationship can be seen in the resistor\'s working principle which states that the current passing through a resistor is equal to the applied voltage divided by the resistance value. In other words, the amount of current that can flow through the resistor is dependent on the amount of voltage applied. For example, if a 10-volt signal is applied across the resistor, then the current that will flow through it will be equal to 10 divided by the resistor\'s resistance value.
Additionally, the ERG-2SJ471V has the ability to be configured into different resistance values. This is done by changing the number of turns in the resistor\'s internal core, which alters the amount of current that will flow through it. This means that the resistance value of the resistor can be adjusted depending on the application, making it a versatile component. By tinkering with the configuration of the ERG-2SJ471V, users can achieve the desired resistance value for their particular circuit.
The ERG-2SJ471V is a great choice for application in high-voltage circuits and systems due to its high insulation capabilities, thick construction, and compatibility with high resistance values. With its ability to be adjusted, the ERG-2SJ471V can be used to control the currents and voltage applied to circuits, making it the perfect choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...