Allicdata Part #: | P4.7KW-2TR-ND |
Manufacturer Part#: |
ERG-2SJ472A |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 4.7K OHM 2W 5% AXIAL |
More Detail: | 4.7 kOhms ±5% 2W Through Hole Resistor Axial Flame... |
DataSheet: | ERG-2SJ472A Datasheet/PDF |
Quantity: | 12000 |
3000 +: | $ 0.02176 |
6000 +: | $ 0.01978 |
15000 +: | $ 0.01846 |
30000 +: | $ 0.01754 |
75000 +: | $ 0.01718 |
150000 +: | $ 0.01681 |
Series: | ERG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 4.7 kOhms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors, such as the ERG-2SJ472A, are a type of electrical component designed to control the electrical flow in a circuit. The resistor is made up of a conductive material, usually metal, which has been plated with a resistor material. This provides a resistance to the flow of electrons which will vary depending on the length and thickness of the wire or material used to make the resistor. The main purpose of a resistor is to reduce the amount of current in a circuit, which can prevent damage to electrical components within the circuit due to surges of current. It can also act as a buffer between different circuits, smoothing out the transition of electrical energy between different locations.As its name would suggest, the ERG-2SJ472A is a through hole resistor, which means that its connection to the circuit is made through a hole in the board rather than through soldering. Its hole diameter is 0.31 inch, which is larger than the usual 0.2 inch used for most through-hole resistors. This larger size means that the ERG-2SJ472A can handle up to two (2) Amps of current, which makes it suitable for higher power applications where more current is required.The ERG-2SJ472A features a 2.2K Ohm resistance and can be used in a variety of applications, including amplifiers, motor controls, and even in the automotive industry. In amplifiers, a resistor is typically used to ensure that the voltage level sent to the speaker is appropriate, while in motor control circuits, it may be used to limit the current flowing through transistors and other components. In automotive applications, a resistor may be used as a current-limiting device, or to control the amount of power that is drawn from the battery.The working principle of the ERG-2SJ472A is relatively simple. When a voltage or current is applied to the device, electrons are forced to flow through the resistor, producing a current flow in the opposite direction. This current flow will create an opposing electric field, which will effectively resist the current and slow down the flow of electrons. This produces a resistance that is relative to the size of the resistor and the amount of current applied. As the voltage or current is increased, the resistance of the resistor also increases, reducing the amount of current that is allowed to flow.In conclusion, the ERG-2SJ472A is a through hole resistor which provides a highly reliable 2.2K Ohm resistance. It is suitable for a range of applications, including amplifiers and motor controls, and can handle up to two (2) Amps of current. The working principle is based on the opposing electric field created by the current flow through the resistor, which increases as the voltage or current is increased, reducing the amount of current allowed to flow.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...