ERG-2SJ620A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors
The ERG-2SJ620A is a through-hole resistor, which is used to control the current flow in a circuit. It can be used to limit the voltage and current applied to a circuit, to provide protection against short circuits, and to maintain a constant voltage or current in a circuit. The ERG-2SJ620A through-hole resistor is constructed from a cermet or metal alloy element, which is sealed within a plastic body. The element is connected to the terminals of the resistor, which fit into a standard through-hole in the printed circuit board.Through-hole resistors have several advantages over other types of resistors. They are relatively inexpensive, and easy to install onto a PCB. They are more robust than surface mount resistors, which makes them ideal for applications where the resistor may be exposed to physical shock or vibration. Through-hole resistors provide a high degree of power dissipation, and are less susceptible to thermal runaway than other types of resistors. In addition, they provide better thermal performance than other types of resistors, as they dissipate heat more efficiently.The ERG-2SJ620A through-hole resistor is a popular choice in applications where reliability and performance are paramount. The ERG-2SJ620A is composed of a cermet element, which is rated for power dissipation of up to 0.75W. The resistance element is housed in a flame-retardant, UL-746C, UL-94V-0 body, with a tolerance of ±10%. The resistor is rated for operating temperatures of up to 250° C. The terminals are nickel-plated, with a solderable finish, and can accept a maximum wire size of 22 AWG.The ERG-2SJ620A through-hole resistor is suitable for a wide range of applications, including automotive, industrial, telecommunications, broadcasting, and consumer electronics. It is used in AC/DC circuits for protection against over-current and short circuits, voltage regulation, and motor speed control. It is also used for temperature measurement, current monitoring, signal attenuation, noise suppression, as a voltage divider, and as a power resistor in power supply circuits.In order to ensure reliable operation, it is important to follow the manufacturer’s guidelines for installation. The ERG-2SJ620A should be mounted to a flat surface, on a printed circuit board, using the provided screws or nuts. The manufacturer recommends 1mm spacing between each of the terminals, to ensure proper heat dissipation. The terminals should be soldered, using lead-free solder, to an area with a surface that is flat and free of dust, debris, and other contaminants.To ensure the best possible performance, it is important to choose a non-inductive resistor for the application. Non-inductive resistors are designed to minimize voltage spikes, by providing lower coil inductance. Inductive resistors, on the other hand, can cause voltage and current spikes, which can lead to damage or malfunction of the circuit. Inductance also increases power dissipation, which can lead to premature failure of the resistor.In summary, the ERG-2SJ620A through-hole resistor is a reliable and cost-efficient option for a wide range of applications. It is designed to provide reliable operation in harsh environments, and is rated for operating temperatures of up to 250° C. It is composed of a cermet element, and is suitable for use in AC/DC circuits, as well as for voltage and current regulation, signal attenuation, and noise suppression. When installing the ERG-2SJ620A, it is important to follow the manufacturer’s guidelines, and to choose a non-inductive resistor, to ensure the best possible performance.

The specific data is subject to PDF, and the above content is for reference