ERG-3SJ511

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used to provide a fixed ratio of resistance in electrical circuits. They are generally used to provide a resistive current path which limits the flow of current, controls the voltage levels, and filters out any unwanted high–frequency noise from the signal flow. The resistance of the resistor can be adjusted by using a wide range of values. Resistor components are designed and fabricated with specific values that do not change over the course of their operations. Thus, through hole resistors that are specified in terms of resistance are known as fixed resistors.The ERG-3SJ511 is a through hole resistor in which the resistance value remains constant. It is available in various sizes and shapes for use in a variety of applications. The resistor is made of nickel-chrome metal alloy with gold-plated leads that provide good solderability and corrosion resistance. It is designed to provide a high-precision resistance value of 511 ohms with a tolerance of +/- 0.25%. The resistor also has a wattage rating of 0.25 W.The ERG-3SJ511 can be used in a wide range of applications, including voltage division, signal shunting, limiting current, and power regulation. In voltage division, the resistor is used to divide the voltage applied to a circuit into two or more levels, which reduces the amount of power required to achieve a desired voltage level. The resistor can also be used as a signal shunt to reduce the strength of a signal in order to prevent it from overloading the circuit. In current limiting applications, the resistor is used to limit the amount of current through a circuit in order to avoid damage due to excessive current flow. Finally, the ERG-3SJ511 is used in power regulation applications to regulate the current flow in a circuit.The ERG-3SJ511 works on the principle of setting up a steady-state voltage difference across its leads, which corresponds to the chosen resistance. The two terminals of the resistor are connected together at the body-end and the ratio of the resistance is determined by the ratio of the length and the cross-sectional area of the resistor. When a voltage is applied across the resistor, the electric current flowing through it is inversely proportional to the resistance of the resistors. The current will flow through the resistor until an equilibrium is achieved when the voltage drop across the resistor is equal to the applied voltage. The power dissipated by the resistor is proportional to the square of the applied voltage.In summary, the ERG-3SJ511 is a through hole resistor with a fixed resistance value of 511 ohms and a tolerance of +/- 0.25%. It is designed to provide a steady-state voltage difference across its leads, and is used in applications such as voltage division, signal shunting, current limiting, and power regulation. Its resistance is determined by the ratio of the length and the cross-sectional area of the resistor. The power dissipated by the resistor is proportional to the square of the applied voltage.

The specific data is subject to PDF, and the above content is for reference