ERJ-8GEY0R00V Resistors |
|
Allicdata Part #: | P0.0ETR-ND |
Manufacturer Part#: |
ERJ-8GEY0R00V |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES SMD 0 OHM JUMPER 1/4W 1206 |
More Detail: | 0 Ohms Jumper 0.25W, 1/4W Chip Resistor 1206 (3216... |
DataSheet: | ERJ-8GEY0R00V Datasheet/PDF |
Quantity: | 830000 |
Series: | ERJ |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 0 Ohms |
Tolerance: | Jumper |
Power (Watts): | 0.25W, 1/4W |
Composition: | Thick Film |
Features: | Automotive AEC-Q200 |
Temperature Coefficient: | -- |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | 1206 (3216 Metric) |
Supplier Device Package: | 1206 |
Size / Dimension: | 0.126" L x 0.063" W (3.20mm x 1.60mm) |
Height - Seated (Max): | 0.028" (0.70mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ERJ-8GEY0R00V is a chip resistor that is surface mountable on a circuit board. It is a thin-film passive component commonly used to create resistors for circuits with high speed dynamic switching requirements at high temperatures. The ERJ-8GEY0R00V is constructed with a substrate, a metal film, and a protective layer. The substrate is typically silica-based ceramic that is fired in a sintering process in order to ensure its durability and strength against the high-temperature environment. The metal film is usually aluminum, and is chosen for its satisfactory resistance for the particular circuit application and its high thermal conductivity. The protective layer is usually silicone or combination of silicone and polyimide which is typically applied using a process called vapor deposition.
The ERJ-8GEY0R00V is ideal for use in high speed dynamic switching applications such as data networks, where high performance, reliability and temperature range are demanded. Typically the chip is used in combinations with an additional surface mount device (e.g. logic chips or amplifiers) to complete the signal network. To reduce power dissipation in the device, the resistors must be chosen carefully, based on the current demand and switching needs of the particular application.
The working principle of the ERJ-8GEY0R00V is based on Ohm’s law: when a voltage is applied to the two ends of the chip, the current will flow through the resistor in accordance to the resistance value of the metal film. The current creates a voltage drop across the resistor due to the resistance value of the metal film and voltage divider rule. This voltage drop is the output voltage, and is limited and determined by the resistance value. The same voltage will be applied to the other end of the chip.
Apart from its application at high speed dynamic, the ERJ-8GEY0R00V chip resistor is also suitable for impact/shock resistance, noise reduction, current/voltage isolation, load balancing, and other general purpose switching applications. It has a wide operating temperature range of -55°C to +175°C, and the current rating of the device depends on the particular application as well as the resistance value. It is also able to withstand a continuous mechanical shock force up to a certain limits specified in the datasheet.
The ERJ-8GEY0R00V chip resistor is a reliable and cost-effective solution for creating reliable and precise resistors for high speed dynamic switching applications. It is constructed and designed to ensure performance up to high temperature range as well as reliable operation for many years.
The specific data is subject to PDF, and the above content is for reference
RES SMD 499 OHM 0.1% 1/16W 0402499 Ohms ...
RES SMD 51K OHM 0.1% 1/16W 040251 kOhms ...
RES SMD 4.7K OHM 0.1% 1/16W 04024.7 kOhm...
RES SMD 49.9 OHM 0.1% 1/16W 040249.9 Ohm...
RES SMD 20K OHM 0.1% 1/16W 040220 kOhms ...
RES SMD 3K OHM 0.1% 1/16W 04023 kOhms 0....