ERM 1-12MM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ERM 1-12MM is a special LED spacers, standoffs, and supports that finds a multitude of applications across most industries. Small and compact, the ERM 1-12MM is constructed with an aluminum backing, a steel retaining clip, and an ABS insulator. This makes it an especially lightweight and low profile support, as well as durable enough to handle various applications.

LEDs are the most efficient lighting source, consuming less energy and providing more luminosity than conventional bulbs or lighting sources. As such, the ERM 1-12MM was designed for use in LED surface mount applications. Using the steel clip, the ERM 1-12MM can be snapped into place so that the entire device can sit flush with the board or other mounting surface. This ensures heat dissipation and the long-term performance of the LEDs.

The steel clip and aluminum backing work together in order to tightly secure the ERM 1-12MM in place. When the clip is pressed into the aluminum backing, it secures the support and prevents it from moving around on the board. The ABS insulator helps to protect the contacts on the board from short circuiting or damage, as well as any interference caused by electromagnetic and radio frequency radiation.

The ERM 1-12MM can be used in both wireless and wired LED applications. In wireless applications, the ERM 1-12MM makes it easy to secure your LEDs to the mounting surface, thereby allowing them to extend more remotely from the controller. This helps to increase your range of light and provides maximum illumination to a larger area.

In wired applications, the ERM 1-12MM provides precision support for both in-line and surface mounted LEDs. Its secure fit ensures that the contacts and wiring remain secure, preventing any potential wire chaffing or damage to the LED. The ERM 1-12MM also provides a level of protection against the heat generated by the LED, as the aluminum backing helps to dissipate the heat away from the LED and off of the board.

The ERM 1-12MM is also suitable for use in applications involving dimming or color changing LEDs, where the pass-through wiring can be secured in place to ensure that the operation of the LEDs remain consistent. When used with an integrated controller, the standoffs can make adjusting the color and intensity of the LEDs much ...

The specific data is subject to PDF, and the above content is for reference