ERM 1-19MM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Light-emitting diodes (LEDs) are a special type of semiconductor device that induces a current in a visible light when electric energy is applied. LEDs are not only energy-efficient, but also present a high degree of reliability and flexibility when used for a variety of applications. One of the most commonly used LED applications is the spacing, standoff, or ERM 1-19mm series. This series of standard surface mount mounting systems are designed for a wide range of lighting applications, including automotive and industrial applications.

ERM 1-19mm series consists of base plates, spacers, and standoffs, which are sand-blasted before assembly. This provides a flat surface, thereby providing the best self-alignment of the LEDs and ensuring the best performance. Depending on the application, the base plate can have one or more layers. The top layer is a non-conductive silicone substrate, and the bottom layer is a conductive metal substrate. The size and number of layers may vary, depending on the application. The spacers and standoffs also vary in length and diameter, depending on the application.

Once the base plate is prepared, the LEDs are installed on the base plate, and detailed wiring is performed. The wiring requires minimal assembly and is completed with a small screw that is tightened on the outside of the base plate. The wires are placed in the holes on the base plate and the LEDs are then glued onto their mounting points. Wires are then connected to each LED and the electrical connections are tested to ensure proper operation.

Another important component of the ERM 1-19 series is the LED holder. The LED holder is made of a silicone rubber material and contains several small springs for the LED connections. The holder secures the LED in place and prevents it from becoming dislodged from the base plate. It also ensures the electrical connections are secure and allow for consistent illumination of the LED when connected.

Once the LEDs are secured in place, the spacers and stands are added. Spacers and stands provide additional support and secure the LED in a position where it is not exposed to any external stresses. The stands also provide additional protection against shock and vibration, allowing easier installation and removal when necessary. The spacers and stands are made from a non-conductive material, and all connections are tested and certified to ensure they remain in place and do not suffer from electrical or mechanical failures.

ERM 1-19mm series is widely used for various lighting applications, including automotive and industrial lighting. This series of LED mounting systems is designed to ensure uniform illumination, efficient heat dissipation, excellent reliability and performance, and is cost-effective. The standard surface mount mounting method provides an even, consistent surface finish for the highest performance.

The specific data is subject to PDF, and the above content is for reference