Allicdata Part #: | P3.6W-2BK-ND |
Manufacturer Part#: |
ERX-2SJ3R6 |
Price: | $ 0.18 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 3.6 OHM 2W 5% AXIAL |
More Detail: | 3.6 Ohms ±5% 2W Through Hole Resistor Axial Flame ... |
DataSheet: | ERX-2SJ3R6 Datasheet/PDF |
Quantity: | 9557 |
1 +: | $ 0.16200 |
10 +: | $ 0.13545 |
25 +: | $ 0.09864 |
50 +: | $ 0.07155 |
100 +: | $ 0.05301 |
250 +: | $ 0.04070 |
500 +: | $ 0.03206 |
1000 +: | $ 0.02219 |
5000 +: | $ 0.01850 |
Series: | ERX |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 3.6 Ohms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are electronic components used to regulate current levels and energy in various circuits. They are typically able to bear repeated current flows, so they are highly efficient. The ERX-2SJ3R6 is a Pre-set Trimmer type resistor, a type of Through Hole Resistor. This component is used commonly in meters, batteries, alarms, fans, and other electrical equipment.
The ERX-2SJ3R6 is similar to the traditional Through Hole Resistor in its construction. It is made of copper clad paper which is striped into thin plates, each of which contains resistance. The plates are then stacked together in a spiral pattern, so that the resistance value can easily be adjusted. This is done by turning a knob or adjusting a dial.
The ERX-2SJ3R6 is used in many applications. For example, it can be used in meter applications to measure current within the device. It can also be used in batteries, alarms, fans, and other electrical equipment to regulate current output. It can also be used in measuring devices, such as multimeters, within systems to measure specific components. In these applications, it is necessary to adjust the resistance in order to obtain accurate readings.
The working principle of the ERX-2SJ3R6 is fairly simple. It is composed of several thin plates of resistance material, each arranged in a spiral shape. By adjusting the knob or dial, the resistance in the device can be changed. This is done by increasing or decreasing the voltage, which in turn increases or decreases the resistance value. The specific value at which the resistance is set decides the output current of the device.
In conclusion, the ERX-2SJ3R6 is a Pre-set Trimmer type resistor, which is used in meters, batteries, alarms, fans, and other electrical equipment. It is a type of Through Hole Resistor which is made of copper clad paper and arranged in a spiral pattern for adjustable resistance. The resistance of the device can be adjusted by turning the knob or dial, thus changing the output current of the device. This allows the device to be used for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...