| Allicdata Part #: | P3.6W-2TR-ND |
| Manufacturer Part#: |
ERX-2SJ3R6A |
| Price: | $ 0.03 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 3.6 OHM 2W 5% AXIAL |
| More Detail: | 3.6 Ohms ±5% 2W Through Hole Resistor Axial Flame ... |
| DataSheet: |  ERX-2SJ3R6A Datasheet/PDF |
| Quantity: | 12000 |
| 3000 +: | $ 0.02176 |
| 6000 +: | $ 0.01978 |
| 15000 +: | $ 0.01846 |
| 30000 +: | $ 0.01754 |
| 75000 +: | $ 0.01718 |
| 150000 +: | $ 0.01681 |
| Series: | ERX |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 3.6 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 2W |
| Composition: | Metal Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±350ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors vary greatly in their properties, making them a highly versatile component within electronic designs. The ERX-2SJ3R6A is no exception, and can find a range of applications dependent upon the electrical characteristics it offers. This article will discuss the applications of this resistor, and its working principles.
Applications
The ERX-2SJ3R6A is a through hole resistor designed for use in a wide variety of circuit applications. Its power tolerance is rated at 2 Watts, allowing it to perform effectively in power circuits. It offers excellent thermal characteristics, making it well suited to use in pulsed power circuits. These high power characteristics are also useful when used in power surge protection circuits to limit power spikes from damaging other components.
The resistor also offers consistent linearity and high frequencies up to 2MHz, making it well suited for use in Audio circuits. This allows for highly accurate signal reproduction and minimizes distortion. The resistor is also lightweight and small in size, making it suitable for use in portable devices. This makes the resistor particularly useful in wireless applications, enabling the use of robust circuit designs that are compatible with smaller form factors.
Working Principle
Through hole resistors make use of a resistance element that is made of an insulating material such as ceramic or silicon. This material acts to restrict the flow of electricity by introducing resistance, which can be further increased by increasing the length of the element. This element is connected to the terminals at the two ends of the resistor, along with a wire, allowing it to be connected to the circuit. When a voltage is applied across the terminals, it will travel through the element, encountering resistance and producing heat.
The amount of resistance is determined by the material used, the length of the element, and the shape and size of the resistor. The ERX-2SJ3R6A is constructed in such a way that it allows for up to 2 Watts of power, enabling it to be used in higher power circuits without overloading. The resistor also offers higher frequencies up to 2MHz, making it suitable for use in audio applications.
Conclusion
The ERX-2SJ3R6A is a through hole resistor that offers a versatile range of electrical characteristics. It can be used in a variety of circuit applications, from power surge protection, wireless applications, and audio circuits. The resistor is lightweight and small in size, allowing for convenient portability. This makes the resistor well suited for use in a range of applications. The working principle of the resistor relies on the introduction of resistance through a resistance element made of a material that restricts the flow of electricity, which can then be adjusted through the length and shape of the element.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...