ERZ-E07A471

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVSs) and Metal Oxide Varistors (MOVs) are two of the most common ways of protecting electronic circuits from voltage surges. The ERZ-E07A471 is a type of Metal Oxide Varistor (MOV) that can be used to protect circuits from transient and overvoltage. It is a high-temperature aluminum oxide varistor and can be used in applications that have higher voltage transients.

The ERZ-E07A471 is a four-pin, low capacitance varistor with a maximum voltage rating of 27V. Its capacitance range varies from 47pF to 63pF and its surge current rating is 27A. The device has a maximum transient voltage and its peak pulse power rating is 2800W. Its operating temperature range is between -40° to +85°C.

The ERZ-E07A471 is mainly used in applications such as telecom equipment, remote radio frequency, network cards, and LCDs. It can be used to prevent, limit, or remove transient overvoltages in circuits. The device offers a high level of protection against voltage spikes due to its high transient voltage rating and low capacitance. It can also be used in the protection of connected electronic components that would otherwise be damaged by the overvoltage.

The working principle of the ERZ-E07A471 is that it uses the Screened Layer Technology to disperse and diffuse any voltage spikes that occur. The screened layer consists of several layers of metal oxide that are applied over the MOV device. The layers are coated with a conductive adhesive that forms a continuous, unified dissipative field. Whenever there is an overvoltage condition, the layers absorb the electrical energy and disperse it with the conductive adhesive. The dispersed energy is then slowly released from the device. This process protects the connected electronic components from any harmful effects of voltage transients.

The ERZ-E07A471 is a convenient and effective way to protect circuits from transient and overvoltage conditions. It helps to prevent damaging effects on connected components and has a high voltage transient and surge current rating. In addition, its low capacitance and temperature range make it a good choice for applications in telecom, RF, network cards, and LCDs.

The specific data is subject to PDF, and the above content is for reference