ERZ-E07B361CS

Varistor Voltage (Typ):	360V
Package / Case:	Disc 9mm
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C (TA)
Capacitance @ Frequency:	260pF @ 1kHz
Number of Circuits:	1
Energy:	50J
Current - Surge:	2.5kA
Varistor Voltage (Max):	396V
Series:	ZNR®
Varistor Voltage (Min):	324V
Maximum DC Volts:	300V
Maximum AC Volts:	230V
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ERZ-E07B361CS is a Transient Voltage Suppressor (TVS) and is part of a family of devices known as Varistors (Metal Oxide Varistors - MOVs). They are used for protection against overvoltage transients and ESD (electrostatic discharge) in various electrical and electronic components.MOVs are typically used in power supplies, communications, automotive electronics, and consumer electronic devices. They are most effective when they are placed close to where the damage can occur, either in a component’s circuit board or on its conductor pins.A MOV works by temporarily diverting excessive electrical current away from the vulnerable parts of a system. This current is then guided along a surface of the MOV to a specifically designed ground plane.The MOV itself has two distinct characteristics, its transient voltage rating (TVR) and its Maximum Continuous Allowable Voltage (Vm). The TVR and Vm are key elements in the protection of the device to be protected. The TVR is the voltage threshold above which the MOV will become operational and the Vm is the maximum voltage allowed to flow through the MOV while still providing protection.The ERZ-E07B361CS is designed for use in high-end protection applications. It is rated at a peak pulse power dissipation of 1.5kW and a clampingvoltage of 360V. The clamping voltage rating indicates the maximum voltage level the TVS device can handle during a transient overvoltage or ESD event without becoming damaged. The TVS also has a low on-state resistance of 0.06 ohms, which is a measure of the resistance to current flow when the MOV is in operation.The working principle of the ERZ-E07B361CS is simple yet powerful. When a voltage spike or any surge exceeds the MOV’s TVR, the device will trigger and divert the current away from the protected component. The triggered MOV will then prevent the excessive current flow from reaching the protected device and causing any damage. The ERZ-E07B361CS is suitable for a wide range of protection needs. In addition to its impressive peak pulse power dissipation and clamping voltage ratings, the device also has a low on-state resistance which will help keep power losses to a minimum. The device also has a fast response time of less than 100 nanoseconds which is great for applications with rapidly changing conditions. The ERZ-E07B361CS is also designed to be compatible with existing systems, making it the perfect choice for an upgrade or as a replacement in existing applications. The device is also designed to last even in extreme conditions, so it can be used in any environment where protection is needed. The ERZ-E07B361CS is a great choice for applications where overvoltage and ESD protection is needed. With its impressive TVR, Vm, and low on-state resistance, the device can provide protection to any system while being cost-effective and energy efficient.

The specific data is subject to PDF, and the above content is for reference