ERZ-E10A241

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ERZ-E10A241 is an overvoltage protection device that is applied in consumer electronics, professional audio electronics, communication, automotive, and other sensitive equipment in order to safeguard against high voltage and surges that can cause equipment destruction. This device is classified under TVS – Varistors, MOVs (Metal Oxide Varistors).

A TVS (transient voltage suppression) device is a three-terminal solid state component that is designed to protect electronic circuits against high voltage and surges. It has a semiconductor component that acts as a switch and is capable of conducting current when the reverse voltage across it exceeds its reverse breakdown rating. The TVS can also stand-off very high voltage without continuous current limiting, until the voltage is discharged. In addition, it will safely allow current flow under normal operating conditions.

A MOV (metal oxide varistor) is an overvoltage protection device that limits the voltage of an electrical line during a surge and diverts the high voltage away from the circuit. It is made up of multiple layers of zinc oxide, and other metallic oxides. It is generally cheaper than TVS and has low capacitance.

The ERZ-E10A241 is a radial leaded varistor with a maximum continuous working voltage (DC or RMS) of 10V, and a maximum surge (peak or transient) of 41V. It has a high surge handling capability (8kA) and is designed to provide protection for low voltage systems. It is a high temperature varistor designed with a power rating of 10 watts (referred to 1MHz, 50% duty cycle). The temperature range of the ERZ-E10A241 is -55°C to +125°C.

The working principle of the ERZ-E10A241 is simple; whenever the voltage increases beyond its rated value, it begins to conduct current. When the voltage is lower than its rated value, the ERZ-E10A241 does not conduct any current. This means that the ERZ-E10A241 can limit the electric current and protect the connected circuit from sudden high voltage spikes.

The ERZ-E10A241 can be applied in a wide range of applications, such as consumer electronics, professional audio electronics, communication, automotive, and other sensitive equipment, where it will protect against high voltage and surge protection. It is also used as an overvoltage protection device for automotive systems, as well as in computer motherboards.

In summary, the ERZ-E10A241 is a radial leaded varistor with a maximum continuous working voltage of 10V and a maximum surge of 41V. It is classified under TVS – Varistors, MOVs, and is used to protect circuit from high voltage spikes and surges. Its working principle is simple; it limits the electric current whenever the voltage exceeds its rated value.

The specific data is subject to PDF, and the above content is for reference