ERZ-E11A511CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) devices are designed to protect sensitive electronic components from voltage surges caused by lightning, electrostatic discharge, inductive switching, and more. These transient voltage suppression diodes, also known as transient voltage suppressors, fail only in parallel and tend to self-trigger on abrupt voltage changes. Once activated, TVS can absorb large amounts of energy and protect circuits against lightning or other large voltage transients.

The ERZ-E11A511CS is a type of TVS device designed for use in high power applications. It features an 11-pin dual MOSFET package with an extremely low clamping voltage and wide operating temperature range of -55 °C to +150°C. The device has a fast response time, a snap rate of 5V/ns, and a high peak surge current rating of 1.5kA. It also features a wide working voltage of 5.5V-65V, making it suitable for a variety of applications.

The ERZ-E11A511CS is used in high power applications such as motor control systems, mobile phone chargers, power switching applications, and automotive electronics. Its purpose is to protect circuits from over-voltage conditions and reduce EMI/RFI noise. It is also used in solar cell and LED lighting systems to protect against lightning and electrostatic discharge.

The working principle of the ERZ-E11A511CS is simple. When an over-voltage (e.g. a surge) is detected, the device will turn on and begin to conduct current, thereby limiting the voltage across the protected circuit. This current is then channeled away from the circuit, protecting it from damage. Once the surge has been dissipated, the device will turn off and return to its normal standby mode.

In order to ensure optimal performance, the ERZ-E11A511CS TVS device should be used in combination with a current limiting resistor and an ESD rated capacitor. The device also features low leakage current, which helps to reduce power consumption. For additional safety, the device should be installed with suitable heatsinks and snubber networks to minimise the potential for overshoot and turn-on noise.

In summary, the ERZ-E11A511CS is a type of TVS device designed for high power applications, featuring an 11-pin dual MOSFET package with an extremely low clamping voltage and wide operating temperature range. Its working principle is to turn on when an over-voltage is detected and limit the voltage across the protected circuit, before turning off and returning to its normal standby mode. It should be used in combination with a current limiting resistor and an ESD rated capacitor for optimal performance, as well as suitable heatsinks and snubber networks for additional safety.

The specific data is subject to PDF, and the above content is for reference