ESD-R-38C-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite cores are used in high-frequency power applications as an inductor or transformer. They are an effective component of power distribution, as they can reduce the amount of energy dissipated from cables and wiring. The ESD-R-38C-1 is a type of ferrite core designed for high-frequency, high-efficiency power applications. It is a robust, dielectric material that is resistant to moisture, temperature, and corrosion.

The ESD-R-38C-1 is designed to help reduce electrical interference caused by spurious signals. It is a high-impedance, wide-band inductor that works in conjunction with resistors or capacitors to create a low-pass filter. This filter removes unwanted high-frequency noise, preventing it from spreading through the power system. The ferrite core has a large amount of inductance, allowing it to reduce signal strength by several orders of magnitude.

The operating principle of the ESD-R-38C-1 is relatively simple. An alternating magnetic field passes through the ferrite core, which creates a voltage in the coil winding. This voltage is applied to the coil windings and generates a magnetic field opposite to the magnetic field of the core. This is known as inductance and helps increase the resistance of the core. As the current flows through the core, it will be attenuated by the inductor.

The ESD-R-38C-1 is designed for low-power applications, although it can also be used in high-power applications. The core is designed with an embedded resistor to ensure that the inductance is consistent over different power levels. It is also designed with an integrated heat sink that helps to dissipate heat generated by the high-power operation.

The ESD-R-38C-1 has many uses in the power system. It can be used as an interference filter, power factor correction, voltage limiting, or as a temperature control device. It can also be used to increase the bandwidth of a signal and reduce its signal-to-noise ratio. It is also an effective component of surge suppression devices, as it is designed to reduce the peak surge voltage.

The ESD-R-38C-1 is an ideal component for wiring and cable applications. It can help to reduce signal interference, minimize power loss, and reduce temperature in high-power systems. Its robust construction and high-efficiency operation make it a reliable power source for many applications.

The specific data is subject to PDF, and the above content is for reference