Allicdata Part #: | 399-10842-ND |
Manufacturer Part#: |
ESD-SR-250 |
Price: | $ 4.49 |
Product Category: | Filters |
Manufacturer: | KEMET |
Short Description: | FERRITE CORE HINGED 13MM |
More Detail: | Hinged (Snap On) Free Hanging Ferrite Core ID 0.5... |
DataSheet: | ESD-SR-250 Datasheet/PDF |
Quantity: | 3 |
1 +: | $ 4.08240 |
10 +: | $ 3.47823 |
25 +: | $ 2.64650 |
50 +: | $ 2.57090 |
100 +: | $ 2.26850 |
250 +: | $ 2.11725 |
500 +: | $ 1.96601 |
1000 +: | $ 1.89040 |
Series: | ESD-SR |
Part Status: | Active |
Type: | Round |
Design: | Hinged (Snap On) |
Impedance @ Frequency: | -- |
Material: | -- |
Inner Dimension: | 0.512" Dia (13.00mm) |
Outer Dimension: | 1.240" W x 1.244" H (31.50mm x 31.60mm) |
Ratings: | -- |
Mounting Type: | Free Hanging |
Length: | 1.496" (38.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ferrite Cores - Cables and Wiring
ESD-SR-250 is a ferrite core winding for cables and wiring. It is designed to reduce interference in communication and data transfer systems. It is commonly used in industrial and automotive applications, and it is especially suitable for high-voltage areas. It is also used in home office and consumer electronics.
In order for ESD-SR-250 to work effectively, it needs to be installed onto a specified number of cables. The process begins by attaching the core onto the cable. This is usually done by joining several cables onto the main core. Depending on the environment, it is recommended to use a special adhesive designed to reduce the effects of environmental influences. Once all the cables are connected, the conductor will be inserted into the core, which will then be wound around the cables and the core.
The welding process is very important. Too little or too much heat can cause point failure. It is recommended to use a manual or automatic welding system capable of controlling the distance between the core and the cables, as well as the temperature. This ensures that the weld is mechanically strong and reliably connected.
Once the welding process is complete, the ESD-SR-250 ferrite core is ready for use. It works by routing the radio frequency signal through the core and onto the cables. The core filters out unwanted frequencies while passing the desired frequencies. This allows the cables to provide the necessary integrity and performance while rejecting any interference caused by unintentional radio frequency radiation.
The length, material, structure, connection and installation of ESD-SR-250 ferrite core windings must be optimized according to application requirements for optimal performance. It is important to ensure that all the cables and cores are selected properly and that the process is done correctly for effective noise suppression. Failing to do so can lead to data errors, poor signal strength and even the complete failure of a system.
In conclusion, ESD-SR-250 is an effective and reliable way to reduce radio frequency interference in highly sensitive and high-voltage environments. It is important to properly select the cores, cables and follow the correct installation process in order to ensure the best performance and maximum noise suppression.
The specific data is subject to PDF, and the above content is for reference
FERRITE CORE PRESS FITFerrite Core ID ...
FERRITE CORE 170 OHM SOLID 8MMSolid Free...
FERRITE 31OHM HINGED 52X1.5MMHinged (Sna...
FERRITE 250OHM HINGED 52X1.50MMHinged (S...
FERRITE 188OHM SOLID 10.21MMSolid Cable ...
FERRITE CORE 280 OHM CLIPClip Together (...