ESHF-111-01-L-D-SM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ESHF-111-01-L-D-SM Rectangular Connectors - Headers, Male Pins are electrical connectors used to couple together signals, power, and other components without hard connections. They are extremely versatile and can be used in multiple applications and industries such as robotics, electronics, communications, and other automotive applications. In many cases, these connectors are often considered to be a viable alternative to solder joints which are more permanent and difficult to undo.

The ESHF-111-01-L-D-SM connector is a small-sized, press-fit mountable, modular connector that uses 2mm of contact. It is a multipin male connector with 2, 3, 4, 5, or 6 rows of contact pins, with 6 pins in each row. It is designed for use with flexible printed circuit boards or flexible substrate materials. The ESHF-111-01-L-D-SM connector utilizes a closed-shell design for strain relief and to protect against interference. This closed-shell consists of a top and bottom housing, two mounting brackets, two metal latch clips, and screw holes. The contacts are recessed from the top and bottom housing to protect against EMI/RFI interference.

The physical dimensions of the ESHF-111-01-L-D-SM connector can vary depending on the routing and the application. The connector overall length (L) is standardized at 66mm and the width is 8.6mm. The contact rows can be a range of 15.24mm to 23.5mm depending on the number of contact pins per row. The distance between each contact row can range from 2.2mm to 6.2mm. The connector can be supplied with a male or female polarizing key and a crimp terminal for easy connection to a wire or ribbon cable.

The ESHF-111-01-L-D-SM connector is used commonly in consumer electronics, automotive sensors, electrical control systems, and other wiring applications where connections and disconnections may be required. It provides a secure connection that is easy to assemble and can be used in applications that require flexible routing, gap or angle connectors, and signal transmission with low contact resistance and high number of mating cycles.

The working principle of the ESHF-111-01-L-D-SM connector is based on the press-fit mounting technique. In this method, the contact pins are mechanically attached to the surface of the PCB. When the connector is mated to the housing, the pins are tightly secured and a secure connection is made. This secure connection ensures a low contact resistance and a high number of mating cycles. The male and female latch clips provide support and strain relief against vibration and the integrated screw holes offer further mechanical strength. The recessed contacts prevent EMI/RFI interference, providing the utmost reliability in terms of signal quality and power transmission.

The specific data is subject to PDF, and the above content is for reference