ESP-10-332-D

Series:	ESP
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Single Stage
Voltage - Rated DC:	250V
Voltage - Rated AC:	250V
Voltage - Rated AC (Phase to Ground/Neutral):	250V
Current:	10A
Frequency - Operating:	--
Applications:	General Purpose
Approvals:	cURus, VDE
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	DIN Rail
Termination Style:	Terminal Block
Inductance:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ESP-10-332-D Power Line Filter Modules

Power Line Filter Modules are single-phase EMI/RFI filter modules used to reduce interference from conducted electric noise in circuits. The ESP-10-332-D is specifically designed to attenuate higher frequency interference on electrical lines by absorbing EMI and noise energy at their specific frequency.The ESP-10-332-D power line filter module uses a three-pin configuration design that makes it easy to install and replace existing filter modules. It is rated for operation from 85 to 147Vac, 50/60Hz and will handle up to 2kV surge. The ESP-10-332-D also has a unique combination of high-value capacitors network to ensure effective EMI protection and superior surge protection.The ESP-10-332-D EMI filter module provides up to 30dB of EMI shielding attenuation when measured at 1MHz, and up to 40dB of attenuation when measured at 10MHz. It is able to eliminate severe micro-interruptions and wideband interference on power lines. The unit has been designed to perform in harsh environment temperatures up to 125℃. The ESP-10-332-D is suitable for filtering microprocessors, CPUs and other digital components with sensitive control circuits.The ESP-10-332-D power line filter module features a sharp, low-loss, wide-bandwidth design that is capable of filtering out noises over a wide frequency range of 10kHz-100MHz. The module also features high off-state impedance and low attenuation over the entire frequency range, which helps to reduce radiated emission. The filter module meets low leakage-current and low power loss requirements for inrush current applications such as soft-start circuits.The ESP-10-332-D power line filter module works by inserting a series of capacitors and inductors between the power source and the load. The components are designed to be operated in parallel with each other, resulting in a continuous attenuation over the desired frequency range. The inductors isolate and absorb electrical noise in the power line, while the capacitors provide filtering between components. The device reduces conducted noise by absorbing noise at the specific frequencies within the band, thus protecting sensitive control circuits.The ESP-10-332-D power line filter module is ideal for applications such as power supply boards, personal computers, small mounted systems, power panels, motor drives, pneumatics, electronic equipment and more. By reducing interference in the system, these filter modules help extend the life of critical components and ensure the highest levels of system performance.

The specific data is subject to PDF, and the above content is for reference