ESQT-119-03-G-D-309

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Connector technology is a rapidly expanding and rapidly evolving field. From the simplest coaxial connectors, to the most complex 3-D printed, multi-channel cable assemblies, there are hundreds of connector designs in between. ESQT-119-03-G-D-309 connectors are rectangular connectors which are primarily used to connect electrical or signal circuits quickly and reliably.

ESQT-119-03-G-D-309 connectors are classified as Headers, Receptacles, and Female Sockets. Generally, headers are “male” connectors which have pins which fit into the sockets or receptacles, which are “female” connectors which have slots to receive the pins from the headers. Many ESQT-119-03-G-D-309 headers are available with either through-hole or surface mount pin configurations. The number of pins per connector can vary depending on the application. It can range from as few as two pins, to as many as three hundred forty eight pins.

The primary component of the ESQT-119-03-G-D-309 conector is its header and receptacle. The header is comprised of a plastic housing which is then guillotined to provide a unique keyway which ensures the correct assembly of two like connectors from different manufacturers. The pins in the header come in a variety of shapes and sizes including but not limited to mini-pins, standard pins, and a variety of self-aligning pins. The receptacle is made from a lightweight dielectric material which is highly corrosion resistant.

The ESQT-119-03-G-D-309 connectors are then coupled together by either soldering, crimping or by the use of locking screws. Depending on the application, the connectors may be wired to the mating connector with solid wire, stranded cable, flexible cable, or ribbon cable. A typical application of the ESQT-119-03-G-D-309 connector would be a communications system which requires two single male connectors to be joined together to carry data between two devices.

The ESQT-119-03-G-D-309 connectors are mainly used in applications such as consumer electronics, power and control, automotive, commercial electronics, medical electronics, transportation and industrial applications. The ESQT-119-03-G-D-309 connector has a number of advantages compared to other types of connectors. It has a very low contact resistance which ensures that electrical connections are made together reliably. The connector also has excellent shielding properties and very low contact formation time. Additionally, the connectors can be used in a wide range of temperature and humidity conditions.

The working principle of the ESQT-119-03-G-D-309 connector is quite straightforward. When a mating header and receptacle are assembled together, the pins on the header will be pushed down into the slots on the receptor. As this happens, the plastic housing of the header will act to secure the two connectors together without sacrificing any of the electrical contact performance. This ensures a continuous connection with no risk of interference or signal degradation due to poor mechanical contact.

These type of connectors are quickly becoming the preferred choice for many types of data transmission and power applications. The relatively low cost and reliable connections make them a great choice for a variety of electronic applications. The ESQT-119-03-G-D-309 connector provides a quick and easy way to join two electrical or signal circuits together.

The specific data is subject to PDF, and the above content is for reference