ESW-107-39-S-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ESW-107-39-S-D are typically classified as rectangular connectors falling under the headers, receptacles, female sockets category. They are primarily designed for power and signal connections as well as for isolation. These connectors are primarily used in industrial, aerospace, military, and communication networks.

The ESW-107-39-S-D is available in 1 to 4 positions and accepts standard terms of 1.25-2.5 mm. On the board side, this connector, reinforced with metal screws, features wedge latch header and a front snap-in peg. The header is designed for double-side mounting.

This connector also features solder-plated pins and a lacing memory clip contact-system for both temporary and permanent connections. It is designed to accept related pin headers as an alternative to turning them over and by providing contact pads protected against externally imposed stress by a screwless mechanism.

The headers/receptacles or female sockets come in both male (plug) and female (socket) variants and are both pole and multi-pole when necessary. The plugs come with a self-locking wedge lock for secure connections while the sockets have an edge rail for temperature resistance. The male and female sockets have a torque control design.

The connectors are designed to provide reliable and secure connections, specially in harsh or extreme environment conditions. The locking device allows the connector to achieve a secure latch but at the same time can unlatch by pressing on the actuator. The self-latching mechanism also prevents accidental disconnections.

The connector is UL and CSA certified and uses a single-pole locking system for secure connections. It is rated for a high power of 12W, a low voltage of 250V, a high voltage of 2750V, and a low current of 2A. It also meets all of the proper UL-60950, CSA and EE requirements.

In terms of size, the ESW-107-39-S-D is very compact. It features a straight-on type design with a single-pole fastening device. The contact height is suitable for both 0.062 and 0.100 inches thick boards, and the peak-to-peak distance between the contacts is 0.187 inches. Additionally, the connector has a narrow body with a finger grip for easy handling.

The working principle of the ESW-107-39-S-D is fairly simple. It has a two-part construction composed of an insulating body and an electrical connection. The plug has a spring loaded plunger that will push the pins or contacts of the socket when the plug is inserted. The spring and pins provide the mechanical and electrical connection between the two components.

ESW-107-39-S-D connectors are primarily used in applications that require reliable and secure connections such as industrial, aerospace, military, and communications networks. The connector’s compact size, high performance, and cost-effectiveness makes it ideal for a variety of demanding applications.

The specific data is subject to PDF, and the above content is for reference