ETQ-P3M2R2YFP Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are used in the field of electrical engineering and electronics to provide electrical characteristics such as inductance, capacitance, and resistance. In this area of technology, the ETQ-P3M2R2YFP is a type of fixed inductor used widely due to its advantages. This page will discuss the applications and working principle of the ETQ-P3M2R2YFP.

The ETQ-P3M2R2YFP is a surface mounted inductor with an inductance range of 0.39-10uH and a rated dc current of here-amp. It is used in applications such as DC-DC converters, flyback converters, satellite receivers, power amplifiers, RF circuit, LED drivers, and automobile electronics. It is composed of ferrite core and copper wire wrapped around the core in order to precisely constrain the magnetic flux and create an induced current.

The ETQ-P3M2R2YFP has a minimum inductance of 0.3uH and a maximum of 10uH, and a frequency range of 10KHz to 331KHz. It is made of a ferrite core, which is renowned for its low noise levels and high stability. The copper wire winding on the core produces an inductance that is stable over the range of operating conditions, such as decreasing temperatures and rising frequencies.

The ETQ-P3M2R2YFP also has a high current capacity of up to 0.7A. This capacity is the result of a tremendously high saturation current. The magnetic core of the ETQ-P3M2R2YFP is designed to provide a high saturation current and low resistance. This combination results in efficient power transfer and reduced heat generation.

In terms of working principles, the ETQ-P3M2R2YFP works by relying on Faraday’s law. At the core of the inductor, when a dc current is applied, the copper wire starts to generate a magnetic flux. The device then creates an inductance by having the magnetic flux constrain the flow of the current. This inductance has the effect of having to oppose any change in current. As a result, the current will be leveled off. The inductor further filters high frequency noise by converting the energy into heat.

In summary, the ETQ-P3M2R2YFP is an ideal fixed inductor for applications such as DC-DC converters, flyback converters, satellite receivers, power amplifiers, RF, circuit, LED drivers, and automobile electronics. It is a surface-mount inductor with a high current capacity and a frequency range of 10KHz to 331KHz. It has a ferrite core and copper wires wrapped around it which create an inductance by constraining the magnetic flux. The inductor works by relying on Faraday’s law and levels off the current while also filtering out high frequency noise.

The specific data is subject to PDF, and the above content is for reference