EV-VN7007ALH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation and demonstration boards and kits have revolutionized the way many technological products perform. One high-performing example is the EV-VN7007ALH, a two-channel twisted pair high speed CAN transceiver and MOSFET driver module from Texas Instruments. This article will discuss the application field and working principle of the EV-VN7007ALH.

The EV-VN7007ALH is designed for CAN communication networks such as automotive and industrial electronics systems. The module is designed to operate in two-channel high speed CAN transceiver (HS-CAN) networks. It has the ability to support ISO 11898-2 and ISO 11898-3 protocol standards, and can handle data rates up to 1 Mbps. The EV-VN7007ALH also includes a MOSFET driver that can provide up to 5 A of power to supply the CAN transceiver module.

The module typically works with a CAN bus controller, such as TI’s TINA-c2000. This enables the system to send and receive signals from the CAN bus in a way that is compliant with the CAN protocol standards. The module can also be used in applications that require an integrated CAN controller, such as automotive systems.

The EV-VN7007ALH features two built-in pulse-width modulation (PWM) output channels that can be used to control a wide range of devices, such as motors, solenoids, relays, and LEDs. When the system is configured in an open-drain output mode, the module can provide up to 5 A of current. The module also includes protection against ESD, short circuits, and over-current.

The EV-VN7007ALH operates in two modes: differential-mode and single-ended mode. In differential-mode, the module can transmit data over two twisted pairs for maximum signal integrity. In single-ended mode, the module can send data over a single pair of wires.

The EV-VN7007ALH also integrates protection and diagnosis functions. To protect the module from short circuits and over-current, the module includes two independent shutdown outputs. The module also features a status output to indicate if there is an error or fault in the system. Additionally, the module has an integrated logic level translator to convert the logic levels of the CAN signals between the microcontroller and the CAN bus.

The EV-VN7007ALH is designed to work with any microcontroller that supports SPI, I2C, or UART interfaces. The module also integrates a low-power sleep mode to reduce power consumption. The module supports a wide temperature range, from -40 to +85°C, and is rated for up to 125°C.

In summary, the EV-VN7007ALH is a high-performance two-channel twisted pair high speed CAN transceiver and MOSFET driver module from Texas Instruments. The module is designed for CAN communication networks such as automotive and industrial electronics systems. It has the ability to support ISO 11898-2 and ISO 11898-3 protocol standards, and can handle data rates up to 1 Mbps. The module also includes protection against ESD, short circuits, and over-current. The module supports a wide temperature range, from -40 to +85°C, and is rated for up to 125°C. Additionally, the module has an integrated logic level translator to convert the logic levels of the CAN signals between the microcontroller and the CAN bus.

The specific data is subject to PDF, and the above content is for reference