Allicdata Part #: | 544-2993-ND |
Manufacturer Part#: |
EVB-EY1602SI-ADJ |
Price: | $ 47.82 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Intel FPGAs/Altera |
Short Description: | EVAL BOARD LINEAR REG 50MA 40V |
More Detail: | EY1602 1 - Single Channels per IC Positive Adjusta... |
DataSheet: | EVB-EY1602SI-ADJ Datasheet/PDF |
Quantity: | 6 |
Lead Free Status / RoHS Status: | Not applicable / Not applicable |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 43.47000 |
Series: | Enpirion® |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Channels per IC: | 1 - Single |
Moisture Sensitivity Level (MSL): | -- |
Voltage - Output: | 2.5 V ~ 12 V |
Current - Output: | 50mA |
Voltage - Input: | 6 V ~ 40 V |
Regulator Type: | Positive Adjustable |
Board Type: | Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | EY1602 |
Note: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The EVB-EY1602SI-ADJ is an evaluation board for linear voltage regulators and is designed for use with the EY1602SI-ADJ series of adjustable voltage regulators – offering up to 0.5A of output current. This evaluation board can be used to set the desired voltage output of the voltage regulator, as well as to measure the output current. It is a perfect tool for evaluating the performance of the EY1602SI-ADJ series of regulators.
The EVB-EY1602SI-ADJ board contains an EY1602SI-ADJ, an onboard potentiometer to adjust the reference voltage of the regulator, and two high current SMT terminals (output and ground). The board also has a power input terminal (Vin) and a voltage monitor pin (Vmon).
The EVB-EY1602SI-ADJ board can be used to evaluate the performance of the EY1602SI-ADJ in various applications, such as power supplies, battery charging, switching regulators, passive compensation networks, and others. It offers users the ability to adjust the voltage output and the current output of the regulator in order to tailor the design to the specific application requirements.
The working principle of the EVB-EY1602SI-ADJ board is as follows: the voltage applied to the Vin terminal is set to a specific value, and then the voltage reference to the EY1602SI-ADJ is set using the onboard potentiometer. Once the voltage reference is set, the voltage output of the regulator can be measured using the Vmon pin. If the voltage output is not as desired, the reference voltage can be adjusted until the desired voltage is achieved. The current output is then measured using the output terminals (output and ground), and can be adjusted by changing the value of the onboard potentiometer.
The EVB-EY1602SI-ADJ board is a useful tool for designers of linear voltage regulator circuits. It provides users with an easy way to adjust the voltage reference, measure the voltage and current output, and thereby evaluate the performance of the EY1602SI-ADJ series of regulators. By knowing the performance characteristics of the regulator in their particular application, designers are better able to fine tune their design.
The specific data is subject to PDF, and the above content is for reference
BOARD EVAL NCP690 1.8VNCP690 1 - Single ...
BOARD EVAL NCP690 1.5VNCP690 1 - Single ...
BOARD EVAL NCP508 1.8V WDFNNCP508 1 - Si...
BOARD EVAL FOR NCP692NCP692 1 - Single C...
EVAL BOARD FOR NCP692MN50T2GNCP692 1 - S...
5V/3.3V BREADBOARD POWER SUPPLYCJA1117B ...