EVB-USB3740

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation and demonstration boards and kits are sets of circuit boards and components used to evaluate and demonstrate a specific technology, product, or system. EVB-USB3740 is a general-purpose evaluation board from Akros Silicon, designed to be used for demonstrations, experiments, and prototyping with the USB3740 family of integrated circuit (IC) chipsets. This board features a variety of integrated functional chips such as a microcontroller, oscillator, ADC, and DAC. It also includes a variety of interfaces for communicating with other devices, including USB, I2C, and SPI.

The EVB-USB3740 is designed with a number of specifically marked sections and components which enable the user to evaluate and understand the many features and functionalities of the USB3740 family of integrated circuits. The board is divided into five major sections, which include the power supply, the microcontroller, the oscillator, the ADC and DAC, and the I2C and SPI interfaces. A detailed block schematic of the EVB-USB3740 is provided in the provided user manual.

The power supply section of the EVB-USB3740 includes a voltage regulator and a number of decoupling capacitors. The voltage regulator is used to provide a stable voltage source to the board, while the decoupling capacitors help reduce noise on the power lines. Additionally, the board includes a number of test points which are used to monitor the board\'s power supply.

The microcontroller section of the EVB-USB3740 consists of a Freescale ColdFire MCF5225C microcontroller. This embedded processor has a RISC architecture with 32-bit data paths and is designed for cost-effective, high-performance applications. The MCF5225C provides a variety of interfaces, such as I2C, SPI, and GPIO, as well as a PWM controller for controlling devices such as LEDs or motors.

The oscillator section of the EVB-USB3740 board consists of a simple oscillator circuit. This circuit is designed to generate an accurate clock signal with low frequency drift. The oscillator circuit is used to provide a reliable source of clock signals for the on-board microcontroller and other peripheral devices.

The ADC and DAC sections of the EVB-USB3740 are integrated with the MCF5225C microcontroller. The MCF5225C includes an onboard 10-bit ADC and an 8-bit DAC. These components enable the board to provide accurate analog-to-digital and digital-to-analog conversion.

The I2C and SPI interfaces are provided on the EVB-USB3740 board to enable communication between different devices. The I2C interface is a two-wire, low-speed serial bus which is commonly used to communicate with device peripherals, such as EEPROMs, real-time clocks, and sensors. The SPI interface is a four-wire, high-speed serial bus which can be used to communicate with a wide variety of external devices. The EVB-USB3740 is designed to support full-duplex communication over both these interfaces.

In summary, the EVB-USB3740 is a general-purpose evaluation board designed for demonstrations, experiments, and prototyping with the USB3740 family of chipsets. This board includes a variety of functional chips, such as a microcontroller, oscillator, ADC, and DAC, as well as a variety of interfaces for communication with other devices. The EVB-USB3740 enables users to evaluate and understand the many features and functionalities of the USB3740 chipsets, providing a cost-effective solution for development and evaluation.

The specific data is subject to PDF, and the above content is for reference