EVB-Z040S1AFR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EVB-Z040S1AFR is a RF Evaluation and Development Kits, Boards used for aiding the development of RF systems, it is based on the ZX CDMA micro baseband, and is compatible with the ZX CDMA and Smooth Edge standards.

The EVB-Z040S1AFR board is essentially a low-cost, low-power integrated development platform that allows users to program and develop their own applications for the ZX CDMA platform. Users can use the board to quickly create real-time applications such as video and audio streaming, LTE base station, GPRS/EDGE base station and more.

In addition to the on-board resources, EVB-Z040S1AFR also supports a variety of external ports including USB, UART and SPI, which can be used to expand the functionality of the board. There is also an external power supply which is used for powering the board and other peripheral devices.

The EVB-Z040S1AFR also features an in-built operating system, ZROS, which is based on a standard Linux kernel. This allows users to quickly program and debug their applications using the integrated development environment. Also, the EVB-Z040S1AFR board can be easily configured using a variety of configuration tools, such as the ZRptool.

The EVB-Z040S1AFR board also includes a variety of on-board hardware and software support, such as the ZX CDMA MAC, video and audio encoder/decoders, the ZR8000 FPGA, an Ethernet controller, an RTC and GPIO as well as a PCIe slot.

The EVB-Z040S1AFR board can be used for a variety of applications, such as LTE base station, cellular data transmission, GPRS/EDGE base station, video streaming, audio streaming, broadcast communications and more.

The EVB-Z040S1AFR has a low power consumption with a 14V power supply, power consumption can be further reduced simply by disabling peripherals such as the GPU and Ethernet controller which will reduce the power consumption to 5.6V.

The working principle of the EVB-Z040S1AFR is based on the typical system architecture of the ZX CDMA micro baseband. First, a baseband signal is generated by the on-board hardware such as the ZX CDMA MAC and video and audio encoders/decoders. This signal is then passed through the ZR8000 FPGA which performs a complex filtering and modulation process.

The output from the FPGA is then sent to the RF front-end, where the signal is then transmitted over the air by an antenna. The receiver end will then receive the signal and pass it to the RF amplifier for amplification and filtering. The amplified signal is then sent to the on-board ZX CDMA MAC from where it is demodulated and decoded.

The EVB-Z040S1AFR board is a great development platform for the ZX CDMA platform, as it allows users to quickly create and develop their own applications with minimal effort. It is also a low-power solution that can be used in a variety of applications, making it an ideal choice for professionals and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference