Allicdata Part #: | P2P9502-ND |
Manufacturer Part#: |
EVJ-C00F25A53 |
Price: | $ 0.00 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | POT 5K OHM 1/20W LOGARITHMIC |
More Detail: | 5k Ohm 2 Gang Logarithmic Through Hole, Snap In Po... |
DataSheet: | EVJ-C00F25A53 Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | 0.00000 |
Temperature Coefficient: | -- |
Mounting Type: | Through Hole, Snap In |
Bushing Thread: | -- |
Actuator Diameter: | 0.236" (6.00mm) |
Actuator Length: | 0.720" (18.30mm) |
Actuator Type: | Flatted |
Termination Style: | PC Pins, Board Locks |
Resistive Material: | -- |
Adjustment Type: | Side Adjustment |
Rotation: | 300° |
Number of Turns: | 1 |
Series: | EVJ |
Power (Watts): | 0.05W, 1/20W |
Built in Switch: | None |
Number of Gangs: | 2 |
Tolerance: | ±20% |
Resistance (Ohms): | 5k |
Taper: | Logarithmic |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats are two terms used in the field of electrical engineering to refer to very similar electronic components. They both work by passing an electrical current through a resistor, but the differences between them lie in the way they are used. An EVJ-C00F25A53 is a type of rotary potentiometer, and although it is a very simple device, it has many applications in many different industries.
Rotary Potentiometers are commonly used in audio applications, where they are used to switch between different sound levels, as well as for controlling volume. When the knob on a rotary potentiometer is turned, the resistance of the resistor changes, allowing the sound levels to be adjusted. In other industries, such as the automotive industry, rotary potentiometers can be used for controlling engine speed, power steering, and other vehicle parameters.
Rheostats are also used to control the current in a circuit, but their main difference from rotary potentiometers is that they do not have a knob which can be used to adjust the current. Instead, they rely on a resistor which changes its resistance when a varying voltage is applied to it. This allows them to be used for controlling current in a variety of applications, such as in heating and air conditioning systems, and in laboratory equipment. The EVJ-C00F25A53 is a type of rheostat, and although it is quite simple in its design, it has many diverse applications.
The working principle of a rotary potentiometer or a rheostat is also relatively simple. As mentioned, when the knob is turned on a rotary potentiometer, the resistance of the resistor changes, allowing the current to be adjusted. Similarly, when a rheostat is applied to a circuit, a voltage is applied to it, causing the resistance of the resistor to change and allowing the current to be adjusted.
In conclusion, the EVJ-C00F25A53 is a type of rotary potentiometer or rheostat, and is commonly used in many industries. It works by changing the resistance of the resistor according to an applied voltage or a knob which is turned, and can be used to control the current in a variety of applications. These components are simple in their design, but are nonetheless essential for many different industries, and a range of different applications.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...