Allicdata Part #: | P2M7103-ND |
Manufacturer Part#: |
EVJ-C31F25B14 |
Price: | $ 1.17 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | POT 10K OHM 1/20W LINEAR |
More Detail: | 10k Ohm 2 Gang Linear Through Hole, Snap In Potent... |
DataSheet: | EVJ-C31F25B14 Datasheet/PDF |
Quantity: | 163 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 1.06470 |
10 +: | $ 0.93744 |
25 +: | $ 0.84042 |
50 +: | $ 0.80816 |
100 +: | $ 0.77578 |
Series: | EVJ |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Obsolete |
Moisture Sensitivity Level (MSL): | -- |
Taper: | Linear |
Resistance (Ohms): | 10k |
Tolerance: | ±20% |
Number of Gangs: | 2 |
Built in Switch: | Detent |
Power (Watts): | 0.05W, 1/20W |
Temperature Coefficient: | -- |
Number of Turns: | 1 |
Rotation: | 300° |
Adjustment Type: | Side Adjustment |
Resistive Material: | -- |
Termination Style: | PC Pins, Board Locks |
Actuator Type: | Flatted |
Actuator Length: | 0.720" (18.30mm) |
Actuator Diameter: | 0.236" (6.00mm) |
Bushing Thread: | -- |
Mounting Type: | Through Hole, Snap In |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats are widely used in various applications. The EVJ-C31F25B14 is a commonly used device in the field of such applications. It is a rotary potentiometer that is used to measure a wide range of electrical and mechanical signals.
The EVJ-C31F25B14 is a two-pole, four-wire device that has an open-ended, flat metal surface. This device consists of two parts: a stator and a movable pole that is connected to a shaft. The electronics component is further connected to a PCB or an external connection point. The device also has two knobs to adjust the position of the moving elements. The device usually comes with adjustable terminals to give a range of different values.
The EVJ-C31F25B14 works by measuring the resistance between two terminal points. The output voltage varies depending on the resistance of the external elements to which it is connected. The device also has a linear taper which means that the resistance values are constant for any given displacement.
The device has a wide range of potential applications. It can be used to measure the flow rate of liquids and gases in both industrial and medical contexts. It can also be used to measure the torque in machinery and in automotive applications. It is also an important component in electronic communication systems as it helps to maintain signal integrity.
The working principle of the device is based on the Wheatstone Bridge principle. This principle states that when two conductors are connected in a series, the voltage across each conductor is proportional to the resistance of the conductor. Therefore, if the resistance of one of the conductors is changed, the voltage across the other conductor will also change accordingly.
In the case of the EVJ-C31F25B14, when the mover element is moved, the resistance of the elements connected to the device changes accordingly. This changes the output voltage, thus indicating the position of the mover element. This makes the device ideal for applications such as throttle control and speed control.
The EVJ-C31F25B14 is a highly efficient device that is used in a variety of applications. It is relatively inexpensive, but produces reliable and accurate results. This makes it an ideal choice for a range of applications where precise measurement of resistance is required.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...