| Allicdata Part #: | P15494-ND |
| Manufacturer Part#: |
EVQ-V5H00415B |
| Price: | $ 2.00 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | ENCODER ROTARY 27/18MM 15PPR |
| More Detail: | N/A |
| DataSheet: |  EVQ-V5H00415B Datasheet/PDF |
| Quantity: | 280 |
| 1 +: | $ 1.81440 |
| 10 +: | $ 1.74006 |
| 25 +: | $ 1.59491 |
| 50 +: | $ 1.52233 |
| 100 +: | $ 1.44988 |
| 250 +: | $ 1.26865 |
| 500 +: | $ 1.23241 |
| 1000 +: | $ 1.05117 |
| 5000 +: | $ 0.94242 |
| Series: | EVQV |
| Part Status: | Active |
| Encoder Type: | Mechanical |
| Output Type: | Quadrature (Incremental) |
| Pulses per Revolution: | 9 |
| Voltage - Supply: | -- |
| Actuator Type: | 27mm Open Center |
| Detent: | Yes |
| Built in Switch: | No |
| Mounting Type: | PCB, Through Hole |
| Orientation: | Vertical |
| Termination Style: | PC Pin |
| Rotational Life (Cycles Min): | 30K |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders are machines that convert signals or measurements of some physical property into electrical signals. EVQ-V5H00415B is an example of an encoder. This encoder is used for continuous sensing, absolute positioning and positioning control. It consists of a special type of optical encoder, called an incremental encoder.
The application field of EVQ-V5H00415B is in various industries, such as automation, motion control, optical inspection and robotics. It is mainly used in the production line, factory automation, positioning control, solar panels control, motor quality inspection, etc.
The working principle of EVQ-V5H00415B is based on the incremental encoder principle. It consists of a disk that has several slots on it. As the disk is turning, a light source is reflecting off the slots causing pulses to be output. These pulses are then used to measure the angular velocity and linear displacement of the disk as it turns.
The basic structure of EVQ-V5H00415B is composed of a disk, a light source, a polarized light detector, a pulse counting circuit, and a signal processing circuit. The disk spins on a spindle, and the light source is placed on one side of the disk. The polarized light detector is placed on the opposite side of the disk. When the disk spins, the light from the light source reflects off the slots on the disk. The reflected light passes through the detector and is detected, resulting in an electrical signal.
The pulse counting circuit is then used to count the number of pulses received from the detector. This number is then compared to a set reference number, and any difference between the two numbers is used to calculate the angular velocity and linear displacement. The signal processing circuit is then used to convert this information into a signal that can be used by the output device.
EVQ-V5H00415B is a very useful encoder in the automation industry. It can help with the measurement and control of various processes including the linear displacement, angular displacement and velocity. Furthermore, it is highly reliable and can operate in extreme environmental conditions.
The specific data is subject to PDF, and the above content is for reference
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V