Allicdata Part #: | P3N4203-ND |
Manufacturer Part#: |
EVU-E3AF25D24 |
Price: | $ 0.71 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | POT 20K OHM 1/20W LOGARITHMIC |
More Detail: | 20k Ohm 1 Gang Logarithmic Through Hole, Snap In P... |
DataSheet: | EVU-E3AF25D24 Datasheet/PDF |
Quantity: | 1646 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | $ 0.64260 |
10 +: | $ 0.56700 |
25 +: | $ 0.51030 |
50 +: | $ 0.49140 |
100 +: | $ 0.47250 |
250 +: | $ 0.44415 |
500 +: | $ 0.37800 |
1000 +: | $ 0.34965 |
Temperature Coefficient: | -- |
Mounting Type: | Through Hole, Snap In |
Bushing Thread: | -- |
Actuator Diameter: | 0.236" (6.00mm) |
Actuator Length: | 0.717" (18.20mm) |
Actuator Type: | Flatted |
Termination Style: | PC Pins, Board Locks |
Resistive Material: | -- |
Adjustment Type: | Side Adjustment |
Rotation: | 300° |
Number of Turns: | 1 |
Series: | EVU |
Power (Watts): | 0.05W, 1/20W |
Built in Switch: | Detent |
Number of Gangs: | 1 |
Tolerance: | ±20% |
Resistance (Ohms): | 20k |
Taper: | Logarithmic |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EVU-E3AF25D24 is a type of rotary potentiometer, rheostat, which is typically used in electrical devices and circuitry. It is called a rotary potentiometer because its resistance changes when it is turned in a rotational direction. This adjustment is essential to make sure that the desired level of voltage given to a device is achieved. The working principle of this device is based on the relationship between the torque applied to its shaft and the resistance of the device. The resistor element is usually made up of carbon based film or wirewound elements depending on the model.
Typically, the EVU-E3AF25D24 consists of a stationary resistance element placed in between the two contact points. When the shaft of the device is turned, the resistance element is moved from one contact point to the other while it transfers the flow of electricity from one point to other. The positioning of the resistance element will cause a decrease or an increase to the flow of voltage depending on the shaft’s position. This ensures that the device can be adjusted to deliver the desired voltage. The device can be used in various electrical applications in order to ensure that the device is outputting the right amount of voltage for its function.
The EVU-E3AF25D24 can be used to measure the amount of voltage being delivered to a device. This is done by using the voltage divider in the device. By placing a voltage into the device, the voltage will then be divided between a specific resistance. The position of the resistance element can then be adjusted in order to change the amount of voltage divided across the resistor and thus accurately measure the amount of voltage being delivered. This is a very useful application in order to diagnose and troubleshoot voltage related issues.
The potentiometer can also be used to control the speed of an electric motor or a system. This is done by changing the position of the resistor element in order to vary the amount of voltage supplied in order to change the speed of the motor or system. By doing this, the speed of the motor or system can be accurately controlled to ensure that it runs at the desired speed.
The device can also be used to adjust a circuit’s sensitivity and range of input. This is very useful in electronic devices and circuitry. By adjusting the resistance element in the EVU-E3AF25D24, the sensitivity and range of input of a circuit can be precisely adjusted to obtain the desired output.
Therefore, the EVU-E3AF25D24 is a rotary potentiometer, rheostat which is used in electrical devices and circuitry in order to accurately asses and adjust the voltage being delivered. The device is mainly used to measure and control the voltage being delivered to a device and also to control the frequency of a device, allowing it to be adjusted to the exact desired setting.
The specific data is subject to PDF, and the above content is for reference
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...