EXB-28V1R8JX Resistors |
|
| Allicdata Part #: | Y71R8TR-ND |
| Manufacturer Part#: |
EXB-28V1R8JX |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES ARRAY 4 RES 1.8 OHM 0804 |
| More Detail: | 1.8 Ohm ±5% 62.5mW Power Per Element Isolated 4 Re... |
| DataSheet: |  EXB-28V1R8JX Datasheet/PDF |
| Quantity: | 10000 |
| 10000 +: | $ 0.00680 |
| 30000 +: | $ 0.00646 |
| 50000 +: | $ 0.00633 |
| 100000 +: | $ 0.00620 |
| Series: | EXB |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Circuit Type: | Isolated |
| Resistance (Ohms): | 1.8 |
| Tolerance: | ±5% |
| Number of Resistors: | 4 |
| Resistor Matching Ratio: | -- |
| Resistor-Ratio-Drift: | -- |
| Number of Pins: | 8 |
| Power Per Element: | 62.5mW |
| Temperature Coefficient: | ±200ppm/°C |
| Operating Temperature: | -55°C ~ 125°C |
| Applications: | Automotive AEC-Q200 |
| Mounting Type: | Surface Mount |
| Package / Case: | 0804, Convex, Long Side Terminals |
| Supplier Device Package: | 0804 |
| Size / Dimension: | 0.079" L x 0.039" W (2.00mm x 1.00mm) |
| Height - Seated (Max): | 0.018" (0.45mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks, Arrays are some of the most common components found in electronics and circuits. They are used to conduct current or to serve as a gate between two points. The EXB-28V1R8JX is one of these resistor networks, arrays that can be used for different applications.
The EXB-28V1R8JX resistor network is a SMD (surface-mount device) package made of ceramic material with gold-plated contacts. It is composed of two resistors connected in series and eight resistors connected in parallel. This gives it a total of 10 resistors, and each has a resistance of 1.8K ohms. This network is designed to provide circuit protection and reduce noise in a wide range of electronic devices, such as audio amplifiers, computers, cell phones, and many more.
Due to its structure, the EXB-28V1R8JX resistor network has a wide range of applications. For instance, it is used for limiting the current in the bias section of Amplifiers and is also used for inrush current suppression or over-current protection. It is a frequent choice for voltage regulator circuits. The device can also be used for DC signals owing to its low leakage current and high isolation resistance. The EXB-28V1R8JX is often used in automotive electronics, home appliances, automation control, and consumer electronics.
The working principle of the EXB-28V1R8JX is quite simple. It is based on Ohm’s Law, where voltage, resistance, and current are related to one another. The network acts as a voltage divider, where the voltage is subdivided according to the resistance of each resistor in the network. This creates two equal sized sub-networks with two resistors in series and eight resistors in parallel. As a result, the voltage is divided equally among all the resistors and the current is limited. In addition, the network is designed to be able to operate in either positive or negative voltage.
The EXB-28V1R8JX resistor network has a range of excellent characteristics including low leakage current, high isolation resistance and high reliability. It is also easy to install and use, as it is designed to save space on the PCB (Printed Circuit Board) and also requires no special wiring. The resistor network can be used for a variety of applications in different electronic devices, and its working principle is quite simple to understand. Due to its versatility, the EXB-28V1R8JX resistor network is a widely used component in the modern electronics industry.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...