| Allicdata Part #: | EXB-2HV430JV-ND |
| Manufacturer Part#: |
EXB-2HV430JV |
| Price: | $ 0.02 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES ARRAY 8 RES 43 OHM 1506 |
| More Detail: | 43 Ohm ±5% 62.5mW Power Per Element Isolated 8 Res... |
| DataSheet: |  EXB-2HV430JV Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.01384 |
| Number of Pins: | 16 |
| Height - Seated (Max): | 0.022" (0.55mm) |
| Size / Dimension: | 0.150" L x 0.063" W (3.80mm x 1.60mm) |
| Supplier Device Package: | 1506 |
| Package / Case: | 1506, Convex, Long Side Terminals |
| Mounting Type: | Surface Mount |
| Applications: | Automotive AEC-Q200 |
| Operating Temperature: | -55°C ~ 125°C |
| Temperature Coefficient: | ±200ppm/°C |
| Power Per Element: | 62.5mW |
| Series: | EXB |
| Resistor-Ratio-Drift: | -- |
| Resistor Matching Ratio: | -- |
| Number of Resistors: | 8 |
| Tolerance: | ±5% |
| Resistance (Ohms): | 43 |
| Circuit Type: | Isolated |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks and Arrays are components that are used to provide resistance in electrical circuits to control the current within a system. The EXB-2HV430JV is a type of resistor network designed to adjust resistance in the circuit, and is used in a variety of applications. This article will cover the application fields, as well as the working principles of this device.
Application Fields
The EXB-2HV430JV is a versatile device, and can be used in a wide range of applications. The most common application fields include automotive electronics, communication, audio components, and high frequency application fields. In automotive electronics, the device is used as a voltage divider, to control the amount of current flowing in the circuit. In communication, the device is used as an impedance matching device, and is used to regulate the voltage signals in the circuit. On audio components, the device is used to adjust the impedance and reduce distortion. In high frequency application fields, the device is used as a band-pass filter to filter out unwanted signals.
Working Principle
The EXB-2HV430JV is a resistor network consisting of two resistors with fixed values. One resistor is a fixed resistor and the other is a variable resistor. The two resistors are connected in series and the fixed resistor is connected to the positive terminal, while the variable resistor is connected to the negative terminal. The resistance value is adjusted by changing the applied voltage. When the applied voltage is increased, the current flowing through the variable resistor increases, and consequently, the resistance of the variable resistor decreases. Conversely, when the applied voltage is decreased, the current flowing through the variable resistor decreases, causing the resistance to increase.
This device is designed to provide increased accuracy and efficiency in adjusting resistance values in the circuit. The two resistors can be used in parallel or in series, depending on the requirement of the circuit. In parallel, both resistors are connected to the same voltage, and the total resistance in the circuit is equal to the sum of the two resistors. In series, the two resistors are connected in series, and the total resistance in the circuit is equal to the product of the two resistors.
In addition, the EXB-2HV430JV is also designed with a built-in amplifier, which can be used to increase the gain of the device. The amplifier is connected to the power supply, and the gain of the amplifier can be adjusted using a potentiometer. This allows for a wide range of applications, such as adjusting the gain of a signal, or even controlling the speed of a motor.
Conclusion
The EXB-2HV430JV is a resistor network that is used to adjust the resistance value in a circuit. It is used in a variety of applications, including automotive electronics, communication, audio components, and high-frequency applications. The device is composed of two resistors, a fixed resistor and a variable resistor, and the resistance value is adjusted by changing the applied voltage. The device also has a built-in amplifier which can increase the gain of the device.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...