EXB-2HV511JV

Number of Pins:	16
Height - Seated (Max):	0.022" (0.55mm)
Size / Dimension:	0.150" L x 0.063" W (3.80mm x 1.60mm)
Supplier Device Package:	1506
Package / Case:	1506, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	EXB
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±5%
Resistance (Ohms):	510
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, usually referred to as arrays, are made up of resistors, wire, and other components. These networks are used to control current, connect circuits, or isolate portions of the circuit from other portions.The EXB-2HV511JV is an example of a resistor network. This particular model is a 4-bit resistor network consisting of a chain of five resistors in series. Each resistor is a low-value, non-linear device, such as an inductor or capacitor, which limits the amount of current that passes through it. The EXB-2HV511JV is designed for use in power supply applications, such as power amplifiers or battery chargers. It provides a precise voltage drop between its input and output, which can be used to regulate or stabilize the voltage supplied to the device. It is also used to minimize the voltage drop at high load currents, such as a battery charger or computer charger. The working principle of the EXB-2HV511JV is based on Ohm’s law. According to this law, the current passing through a resistor is equal to the voltage applied to the resistor divided by its resistance. This means that the EXB-2HV511JV can be used to control the current passing through a circuit by adjusting the resistance of its resistors. For example, if the desired voltage output of a device is 12 volts, then the EXB-2HV511JV can be used to adjust the resistance of its resistors to ensure that the 12 volts is supplied. In addition to power supplies, the EXB-2HV511JV can also be used in circuits that require a precise voltage-stabilization. This is often used in analog-to-digital converters, where the input voltage must be stabilized at a precise level in order to ensure accurate data outputs.The EXB-2HV511JV is also a low-cost alternative to higher-cost resistor arrays, such as the single-chip MCU-type resistor arrays. These higher-cost resistor arrays offer greater flexibility and more precision than the EXB-2HV511JV, but are more expensive. The EXB-2HV511JV is an economical and reliable solution for applications requiring precise voltage regulation. It is an ideal choice for power supplies, voltage-stabilization, and many other applications.

The specific data is subject to PDF, and the above content is for reference