EXB-D10C182J Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays involve a wide range of technologies that allow resistors to be organized together into a connected network or an array. The EXB-D10C182J is an example of a resistor array. This resistor array is used in a variety of displacement transmissions and applications. It is designed for use in a variety of radio-frequency (RF) circuits, including active antenna and passive digital antenna systems.

The EXB-D10C182J has a variety of features that make it suitable for use in RF systems. It is a surface mount device, meaning that it can be mounted directly onto the substrate or integrated circuit board, which reduces the overall size and complexity of the PCB or IC. The component is also designed to be low noise, low power, and high performance. The device can be used in place of a single resistor or a network of resistors in the circuit, allowing for a wide range of possible circuit configurations.

The EXB-D10C182J is an array of chip resistors with a two row configuration. The array includes 10 resistors, arranged in two rows of five resistors each. The resistors are made from metal-oxide-semiconductor field-effect transistors (MOSFETS) which provide a wide range of resistance values, ranging from 0Ω to 10MΩ. Each resistor in the array has its own pinout, and is connected to the ground or supply voltage (GND or Vcc) through various pins, depending on the desired circuit configuration.

The EXB-D10C182J can be used in a wide variety of RF circuits. These include IF (Intermediate Frequency) amplifiers, receivers, transmitters, oscillators, mixers, and equalizers. The array can also be used for impedance matching in order to improve the signal-to-noise ratio in the circuit. Additionally, the EXB-D10C182J can be used to reduce the overall size and complexity of an RF circuitry by minimizing the number of required components.

The working principle of the EXB-D10C182J is based on the “Well Law”, which states that the total resistance of an array is equal to the sum of the individual resistances. As the resistance of each resistor is adjustable, the total resistance of the array can be adjusted by varying the individual resistances. The individual resistances can be adjusted through the use of various devices, such as potentiometers or digital potentiometers.

The EXB-D10C182J is a versatile resistor array that can be used in a variety of RF systems. It is designed for use in low noise, low power, and high performance applications, and can be used to reduce the overall size and complexity of an RF circuit. By adjusting the individual resistances, the total resistance of the array can be changed to obtain the desired result. The EXB-D10C182J is an effective and efficient device for achieving a wide range of RF circuits.

The specific data is subject to PDF, and the above content is for reference