
EXB-E10C274J Resistors |
|
Allicdata Part #: | U8274TR-ND |
Manufacturer Part#: |
EXB-E10C274J |
Price: | $ 0.07 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES ARRAY 8 RES 270K OHM 1608 |
More Detail: | 270k Ohm ±5% 62.5mW Power Per Element Bussed 8 Res... |
DataSheet: | ![]() |
Quantity: | 4000 |
4000 +: | $ 0.05776 |
8000 +: | $ 0.05690 |
12000 +: | $ 0.05454 |
28000 +: | $ 0.05348 |
Number of Pins: | 10 |
Height - Seated (Max): | 0.026" (0.65mm) |
Size / Dimension: | 0.157" L x 0.083" W (4.00mm x 2.10mm) |
Supplier Device Package: | 1608 |
Package / Case: | 1608, Concave, Long Side Terminals |
Mounting Type: | Surface Mount |
Applications: | -- |
Operating Temperature: | -55°C ~ 125°C |
Temperature Coefficient: | ±200ppm/°C |
Power Per Element: | 62.5mW |
Series: | EXB |
Resistor-Ratio-Drift: | -- |
Resistor Matching Ratio: | -- |
Number of Resistors: | 8 |
Tolerance: | ±5% |
Resistance (Ohms): | 270k |
Circuit Type: | Bussed |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor networks and arrays are a type of electrical components used for measuring resistance in electrical circuits. The EXB-E10C274J is one of the most common resistor networks available, and these devices are used for a wide variety of applications.
The EXB-E10C274J is a quad-type switched resistor network, with three-pin array and 8 resistors of 2.4K ohms each. The device is 1.27mm by 1.27mm, with 4mm pitch. The device itself is made up of four 12-pin surface mount devices.
The EXB-E10C274J is typically used for impedance matching applications, such as in stereo receivers and audio amplifiers. The resistors are used to match the impedance of the input signal with that of the output signal – this helps to reduce distortion and improve sound quality. The device can also be used in video applications, where the resistors are used to adjust the signal impedance for optimal signal quality. In addition, the device is also commonly used in high-frequency applications, due to its low insertion loss across a wide frequency range.
The EXB-E10C274J is also used in circuit protection applications, as it is capable of handling a wide range of current and voltage ratings. The resistors can be used to provide protection against over-voltage and over-current events, which can otherwise damage the components in the circuit. The device also has a wide range of temperature coefficients, which allows it to be used in a variety of temperature environments.
The EXB-E10C274J works by controlling the flow of current through the device. The resistors are interconnected in a network, where each resistor is given an equal number of electrical connections. When current flows through the device, each resistor is given a different amount of current, depending on its resistance. This allows the device to control the flow of current and provide a constant resistance. In addition, the resistors can be connected in parallel, allowing multiple resistors to be connected to a single circuit. This allows for a wide range of impedance values to be achieved.
The EXB-E10C274J is a cost-effective solution for a variety of applications, due to its high-performance and low-cost. Its compact size and low weight makes it easy to integrate into a variety of circuit configurations, and its wide range of resistance values make it suitable for a variety of applications. The device is also cost effective due to its low power consumption, and its wide operating temperature range.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...

RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...

RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....

RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....

RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...

RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...
