EXB-S8V201J Resistors |
|
Allicdata Part #: | P16165DKR-ND |
Manufacturer Part#: |
EXB-S8V201J |
Price: | $ 0.20 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES ARRAY 4 RES 200 OHM 2009 |
More Detail: | 200 Ohm ±5% 100mW Power Per Element Isolated 4 Res... |
DataSheet: | EXB-S8V201J Datasheet/PDF |
Quantity: | 4775 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 0.17550 |
10 +: | $ 0.13320 |
25 +: | $ 0.10134 |
50 +: | $ 0.07533 |
100 +: | $ 0.05598 |
250 +: | $ 0.04730 |
500 +: | $ 0.04055 |
1000 +: | $ 0.03089 |
Series: | EXB |
Packaging: | Digi-Reel® |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Circuit Type: | Isolated |
Resistance (Ohms): | 200 |
Tolerance: | ±5% |
Number of Resistors: | 4 |
Resistor Matching Ratio: | -- |
Resistor-Ratio-Drift: | -- |
Number of Pins: | 8 |
Power Per Element: | 100mW |
Temperature Coefficient: | ±200ppm/°C |
Operating Temperature: | -55°C ~ 125°C |
Applications: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 2009, Concave, Long Side Terminals |
Supplier Device Package: | 2009 |
Size / Dimension: | 0.200" L x 0.087" W (5.08mm x 2.20mm) |
Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks, Arrays: EXB-S8V201J Application Field and Working Principle
The EXB-S8V201J is a resistor network and array working as an electronic component array in multiple applications. It is designed to work with multiple amplifiers, transceivers, and voltage regulators in order to achieve precise levels of level-shifting and signal conditioning for various systems. It is produced by Yageo, a market leader in the production of resistor networks.
EXB-S8V201J is a multi-pin (2-pin, 4-pin, 8-pin and so on) package that is widely used. It is designed primarily to provide electrical isolation between positive and negative power sources, as well as providing filtered power for digital logic and sensitive analog applications. This is achieved through the incorporation of a network of resistors, which provides both line isolation and signal control.
The configuration of a resistor network enables various connections to be made that allow for the connection of multiple different devices, such as switches, relays, transistors and other components. The networks can also be used for signal control and noise cancellation through the use of appropriately placed resistors. As multiple networks of resistors are used in a circuit, their individual resistance values are combined in order to achieve the desired response and signal filtering.
To begin working with the EXB-S8V201J, it is important to understand how the resistance values are configured within the resistor network. Each network works differently and is formed in a particular way in order to meet the needs of the application at hand. The most common method of forming a network involves the use of a PCB (Printed Circuit Board) which is populated with the specific resistors that will be used in the application. This is then connected to the components which will form the resistor network, such as switches, transistors and relays.
Once the resistors are in place, it is important to consider which terminals should be connected to the different components and the resistance value required for each terminal. This can be done by splitting the pins off into two segments - a positive and a negative - and then adjusting the resistance value of each section to suit the application. The resistance value of each section can be adjusted by using appropriate resistors to adjust the overall level of effectiveness of the network.
After the resistance profile has been established, a calibration process should be undertaken, where small adjustments are made until the desired result is achieved. This is done by adjusting the resistance value of each section, so that the signal conditioning of the network is correct. After calibration is completed, the power should be supplied to the EXB-S8V201J which will then work in tandem with the other components in the network, to provide the desired level of signal filtering and level-shifting.
The EXB-S8V201J is a versatile resistor network and array, capable of providing electrical isolation and signal control in a wide variety of applications. It is used in combination with multiple different components, allowing the user to achieve precise levels of level-shifting and signal conditioning. By understanding the basics of the resistor network and configuring the resistance values to suit the application, users can achieve great levels of performance and accuracy from the EXB-S8V201J.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...