Allicdata Part #: | Y22R4TR-ND |
Manufacturer Part#: |
EXB-V4V2R4JV |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES ARRAY 2 RES 2.4 OHM 0606 |
More Detail: | 2.4 Ohm ±5% 62.5mW Power Per Element Isolated 2 Re... |
DataSheet: | EXB-V4V2R4JV Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Number of Pins: | 4 |
Height - Seated (Max): | 0.028" (0.70mm) |
Size / Dimension: | 0.063" L x 0.063" W (1.60mm x 1.60mm) |
Supplier Device Package: | 0606 |
Package / Case: | 0606, Concave |
Mounting Type: | Surface Mount |
Applications: | -- |
Operating Temperature: | -55°C ~ 125°C |
Temperature Coefficient: | ±200ppm/°C |
Power Per Element: | 62.5mW |
Series: | EXB |
Resistor-Ratio-Drift: | -- |
Resistor Matching Ratio: | -- |
Number of Resistors: | 2 |
Tolerance: | ±5% |
Resistance (Ohms): | 2.4 |
Circuit Type: | Isolated |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor networks and arrays are widely used in a variety of applications as ways of controlling electronic circuit behavior. One such application using these networks and arrays is the EXB-V4V2R4JV, designed to provide RF signal switching and routing over broad frequency ranges.
The EXB-V4V2R4JV contains four miniature resistor networks and arrays packaged in a single package. Each network is comprised of two resistors, one in series with the other, and the combination in parallel with a third resistor. This arrangement provides very low total resistance throughout the resistors and arrays, creating a circuit capable of switching and routing frequencies in the range of 2.2 GHz to 4.4 GHz. This frequency range is significantly higher than that of most other resistor networks and arrays on the market, making it well-suited for high frequency RF applications.
The EXB-V4V2R4JV works by means of a differential switching network, in which two resistive networks are combined in parallel and then each network is connected to one of two individual switches. The switch then is set to close either resistor network for a given period of time, depending on the desired RF switching application settings. This differential switching technique allows for faster switching speeds than traditional switching methods, and further provides protection to the rest of the circuit from any undesired side effects of switching.
Because the EXB-V4V2R4JV is designed for broadband RF switching and routing, it can be used for a variety of applications. It can be used for controlling the switching of an antenna from one frequency to another for enhanced signal transmission and reception, or for combining multiple antennas into one antenna for higher gain, or for controlling the routing of multiple signals simultaneously. It can also be used for connecting multiple radio frequency signal sources together, such as for wireless local area networks or for cellular base stations.
The EXB-V4V2R4JV is an advanced resistor network and array solution for high frequency RF applications. This network and array package offers a cost-effective solution for switching and routing high frequency signals up to 4.4 GHz, and is well-suited for applications such as wireless and cellular base station setups. With its advanced differential switching network, it is able to provide faster switching speeds than traditional methods, and can also be used to protect the rest of the circuit from undesirable side effects.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...