Allicdata Part #: | EXC-14CP221U-ND |
Manufacturer Part#: |
EXC-14CP221U |
Price: | $ 0.05 |
Product Category: | Filters |
Manufacturer: | Panasonic Electronic Components |
Short Description: | CMC 200MA 2LN 220 OHM SMD |
More Detail: | 2 Line Common Mode Choke Surface Mount 220 Ohms @ ... |
DataSheet: | EXC-14CP221U Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.04183 |
Voltage Rating - AC: | -- |
Package / Case: | 0302 (0806 Metric) |
Height (Max): | 0.020" (0.50mm) |
Size / Dimension: | 0.033" L x 0.026" W (0.85mm x 0.65mm) |
Mounting Type: | Surface Mount |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 85°C |
Series: | EXC14 |
Voltage Rating - DC: | 5V |
DC Resistance (DCR) (Max): | 700 mOhm |
Current Rating (Max): | 200mA |
Impedance @ Frequency: | 220 Ohms @ 100MHz |
Number of Lines: | 2 |
Filter Type: | Signal Line |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common mode chokes, such as the EXC-14CP221U, are useful devices used to reject unwanted EMI in power electronic and communication systems. Common mode chokes reduce the noise that may be caused by differential mode interference, and provide additional protection from voltage transients. The EXC-14CP221U is a high quality, low noise, surface-mountable common mode choke designed to reduce electromagnetic interference (EMI) in various types of equipment, such as programmable logic controllers (PLCs) and motor controllers.
The EXC-14CP221U consists of a ferrite core and two windings of conductive wire. The ferrite core helps to reduce the amount of electromagnetic interference caused by the windings and allows for higher quality filtering than would be possible without the core material. The windings are designed to provide the desired impedance for the application. The windings are also designed in such a way that the common-mode inductance is much greater than the differential-mode inductance, which is necessary for common mode noise reduction.
The EXC-14CP221U is typically used in power electronic and communication systems, typically at the input and output of the system, as it provides a high level of EMI noise rejection. The EXC-14CP221U is used in motor controllers, power supplies, inverters, servo systems, and other power electronic systems. The EXC-14CP221U is also used in PLCs, communications systems, modems, and other communication systems.
The working principle of the EXC-14CP221U can be explained through Faraday\'s law of induction. This states that a changing electromagnetic field will induce a current in the device, which will create a different voltage across the device. In the case of the EXC-14CP221U, this induced current will be filtered through the core and windings of the device, reducing the amount of high frequency noise. The core and windings create a high inductance in the common-mode direction and a low inductance in the differential-mode direction, which is essential for noise reduction.
In conclusion, the EXC-14CP221U is a high quality, low noise common mode choke designed to reduce EMI in various types of systems. Its ferrite core and two windings of conductive wire work together to create a high common mode inductance and low differential mode inductance, allowing for better filtering of induced currents. It is typically used at the input and output of power electronic and communication systems and provides a high level of EMI noise rejection.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...