EXC-3BB221H Allicdata Electronics

EXC-3BB221H Filters

Allicdata Part #:

P10188TR-ND

Manufacturer Part#:

EXC-3BB221H

Price: $ 0.00
Product Category:

Filters

Manufacturer: Panasonic Electronic Components
Short Description: FERRITE BEAD 220 OHM 0603 1LN
More Detail: N/A
DataSheet: EXC-3BB221H datasheetEXC-3BB221H Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: EXC3B
Packaging: Tape & Reel (TR) 
Part Status: Obsolete
Filter Type: Signal Line
Number of Lines: 1
Impedance @ Frequency: 220 Ohms @ 100MHz
Current Rating (Max): 200mA
DC Resistance (DCR) (Max): 300 mOhm
Ratings: --
Operating Temperature: --
Package / Case: 0603 (1608 Metric)
Mounting Type: Surface Mount
Height (Max): 0.039" (1.00mm)
Size / Dimension: 0.063" L x 0.032" W (1.60mm x 0.80mm)
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips

Ferrite beads and chips are electromagnetic, passive components that serve a variety of purposes. Commonly found within electrical appliances, ferrite beads are used to reduce radio frequency (RF) interference in links between two devices. Although they are primarily used in digital communications, they can also help suppress EMI noise in power and signal lines.

EXC-3BB221H Application Field and Working Principle

EXC-3BB221H is a high frequency ferrite chip or bead. It is designed to work with frequencies between 500MHz and 20GHz. This makes it suitable for a range of applications, including digital communication systems, high frequency pulsed circuits, high speed analog communications, semiconductor technologies, and WLANs. The bead works by creating a magnetic shunt around a wire or line, which reduces noise that is attenuated on the interface. It also allows signals to pass through it with a low attenuation. The impedance at the point where the bead is installed becomes much higher than the impedance of the circuit itself, further reducing the noise on the interface.

Another advantage of EXC-3BB221H is that it is extremely powerful and can reduce interference even when the signal frequency of the source is close to, or the same as, the devices being shielded. When properly installed, EXC-3BB221H can effectively reduce or attenuate the noise to a level that is most suitable and helpful for the system.

In addition, EXC-3BB221H is very reliable. It is made of epoxy and ferrite that can withstand temperature, moisture, and atmospheric corrosion. This makes it suitable for long-term applications, as the bead will not suffer damage due to the environment. Furthermore, EXC-3BB221H can also be used in pulsed circuits or systems where the frequency or dampening factor needs to be varied in order to achieve the best noise rejection.

Overall, EXC-3BB221H is an invaluable component for applications that require high frequencies or where EMI noise needs to be reduced. It effectively works to attenuate noise that is within the standard frequency levels, allowing for better signal clarity and improved data reliability.

The specific data is subject to PDF, and the above content is for reference

Latest Products
PMC1206-151

FERRITE BEAD 150 OHM 1206 1LN

PMC1206-151 Allicdata Electronics
ILBB0402ER600V

FERRITE BEAD 60 OHM 0402 1LN

ILBB0402ER600V Allicdata Electronics
FBR07UA850TB-00

FERRITE BEAD

FBR07UA850TB-00 Allicdata Electronics
FBR07UA850SB-00

FERRITE BEAD

FBR07UA850SB-00 Allicdata Electronics
FBR07HA850RB-00

FERRITE BEAD

FBR07HA850RB-00 Allicdata Electronics
FBR07HA850NA-00

FERRITE BEAD

FBR07HA850NA-00 Allicdata Electronics