Allicdata Part #: | 800-2953-ND |
Manufacturer Part#: |
F2250NLGK |
Price: | $ 5.22 |
Product Category: | RF/IF and RFID |
Manufacturer: | IDT, Integrated Device Technology Inc |
Short Description: | IC RF ATTENUATOR |
More Detail: | RF Attenuator 35dB 50MHz ~ 6GHz 50 Ohms 16-TFQFN... |
DataSheet: | F2250NLGK Datasheet/PDF |
Quantity: | 260 |
1 +: | $ 4.75020 |
10 +: | $ 4.35204 |
25 +: | $ 3.95640 |
100 +: | $ 3.56076 |
250 +: | $ 3.26403 |
500 +: | $ 2.96730 |
1000 +: | $ 2.67057 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Attenuation Value: | 35dB |
Frequency Range: | 50MHz ~ 6GHz |
Power (Watts): | -- |
Impedance: | 50 Ohms |
Package / Case: | 16-TFQFN Exposed Pad |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The F2250NLGK is an attenuator that is used in applications that require precise control over the levels of electrical signals. It works by reducing the amplitude of the incoming signal, according to the degree of attenuation specified. The attenuator is available in different types for different degrees of attenuation and has a wide range of applications in electronic systems.
One of the most common applications of the F2250NLGK attenuator is for decibel reduction. This is needed when two signals of very different amplitudes need to be combined in order to avoid distortion or interference in the resultant signal. The attenuator reduces the signal level of the higher amplitude of the two signals so that it matches the level of the lower amplitude of the two. This creates a balanced signal that does not suffer from distortion or interference, even if the two signals are of significantly different amplitudes.
The attenuator is also used in microphone systems and other audio applications to reduce noise. It can also be used to reduce the level of high frequency harmonic distortion caused by amplifiers, as well as reduce the level of low frequency distortion. For this purpose, the attenuator is usually placed between the amplifier and speaker to reduce the level of distortion.
The F2250NLGK attenuator is also used in test and measurement equipment, such as oscilloscopes and spectrum analyzers, as well as in radio frequency (RF) applications to reduce the level of unwanted signals, such as interference from other nearby radio signals. The attenuator can also be used in cellular communication systems, such as portable phones and satellite communication systems, to reduce the level of the transmitted signal so that it does not interfere with other cell phone signals.
The F2250NLGK attenuator is designed to work with passive signal inputs and is effective over a wide range of frequencies. It consists of a series of capacitors, resistors, and other components, all of which are designed to reduce and control the amplitude of the incoming signal. The resistors provide the degree of reduction, while the capacitors are used to smooth out the sound. The specific components used will depend on the application and the type of signal being attenuated.
The F2250NLGK attenuator is versatile and can be used in a wide variety of applications. It is especially suited for use in audio and radio frequency applications, as well as test and measurement equipment. In addition, the attenuator can be used to reduce signal levels in order to avoid distortion or interference in the resulting signal. This makes it an essential component in any electronic system or application that requires precise control over the levels of incoming signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DAMAM15SNM-F225F0 | ITT Cannon, ... | 20.37 $ | 395 | DSUB 15 F CRIMP G50 NM SS... |
DDMAM50PNM-F225F0 | ITT Cannon, ... | 25.3 $ | 61 | DSUB 50 M CRIMP G50 NM SS... |
DDMAM50SNM-F225F0 | ITT Cannon, ... | 29.33 $ | 61 | DSUB 50 F CRIMP G50 F0 NM... |
DAMAM26SNM-F225-F0 | ITT Cannon, ... | 53.61 $ | 395 | DSUB 26 F CRIMP NM G50 F0... |
DDMAM78SNM-F225F0 | ITT Cannon, ... | 58.74 $ | 61 | DSUB 78 F CRIMP G50 NM SS... |
DDMAM78PNM-F225F0 | ITT Cannon, ... | 63.12 $ | 61 | DSUB 78 M CRIMP HD G50 NM... |
DAMAM15PNM-F225F0 | ITT Cannon, ... | 19.63 $ | 48 | DSUB 15 M CRIMP G50 F0 NM... |
DAMAM26PNM-F225F0 | ITT Cannon, ... | 52.33 $ | 48 | DSUB 26 M CRIMP HD G50 NM... |
PDB12-F2251-503BF | Bourns Inc. | 0.39 $ | 1000 | POT 50K OHM 0.08W CARBON ... |
DEMAM9SNM-F225F0 | ITT Cannon, ... | 13.87 $ | 957 | DSUB 9 F CRIMP G50 F0 NM ... |
DEMAM9PNM-F225F0 | ITT Cannon, ... | 14.76 $ | 868 | DSUB 9 M CRIMP G50 F0 NM ... |
2DE19S-F225-F0 | ITT Cannon, ... | 15.76 $ | 468 | MICRO DD 19POS SKTRecepta... |
2DE19P-F225-F0 | ITT Cannon, ... | 16.98 $ | 321 | MICRO DD 19POS PINPlug fo... |
DBMAM25SNM-F225F0 | ITT Cannon, ... | 17.33 $ | 374 | DSUB 25 F CRIMP G50 F0 SS... |
DBMAM25PNM-F225F0 | ITT Cannon, ... | 20.26 $ | 613 | DSUB 25 M CRIMP G50 F0 NM... |
DEMAM15SNM-F225F0 | ITT Cannon, ... | 41.71 $ | 539 | DSUB 15 F CRIMP G50 F0 NM... |
DEMAM15PNM-F225F0 | ITT Cannon, ... | 45.23 $ | 868 | DSUB 15 M CRIMP HD G50 NM... |
DBMAM44SNM-F225F0 | ITT Cannon, ... | 54.98 $ | 363 | DSUB 44 F CRIMP HD G50 NM... |
DBMAM44PNM-F225F0 | ITT Cannon, ... | 58.31 $ | 385 | DSUB 44 M CRIMP HD G50 NM... |
DBMM25PNM-F225 | ITT Cannon, ... | 80.4 $ | 53 | CONN D-SUB PLUG 25POS PNL... |
DEMM9SNM-F225 | ITT Cannon, ... | 80.62 $ | 209 | CONN D-SUB RCPT 9POS PNL ... |
DDMAMT78SNM-F225 | ITT Cannon, ... | 83.85 $ | 61 | CONN D-SUB HD RCPT 78POS ... |
DDMAM78SNM-F225 | ITT Cannon, ... | 84.0 $ | 61 | CONN D-SUB HD RCPT 78POS ... |
DEMAM9PNM-F225 | ITT Cannon, ... | 17.26 $ | 868 | CONN D-SUB PLUG 9P PNL MN... |
DDMM50PNM-F225 | ITT Cannon, ... | 134.11 $ | 34 | CONN D-SUB PLUG 50POS PNL... |
DEMAMT9PNM-F225 | ITT Cannon, ... | 18.46 $ | 868 | CONN D-SUB PLUG 9P PNL MN... |
DAMM15SNM-F225 | ITT Cannon, ... | 117.73 $ | 43 | CONN D-SUB RCPT 15POS PNL... |
DBMAMT44SNM-F225 | ITT Cannon, ... | 122.25 $ | 363 | CONN D-SUB HD RCPT 44POS ... |
DAMAMT15PNM-F225 | ITT Cannon, ... | 22.53 $ | 868 | CONN D-SUB PLUG 15POS PNL... |
DCMAM37SNM-F225F0 | ITT Cannon, ... | 40.54 $ | 1000 | DSUB 37 F CRIMP G50 FO NM... |
DCMAM62PNM-F225F0 | ITT Cannon, ... | 63.67 $ | 1000 | DSUB 62 M CRIMP HD G50 NM... |
DCMAM62SNM-F225F0 | ITT Cannon, ... | 68.48 $ | 1000 | DSUB 62 F CRIMP HD G50 NM... |
DCMAM37PNM-F225F0 | ITT Cannon, ... | 20.8 $ | 1000 | DSUB 37 M CRIMP G50 F0 NM... |
DAMAM15SNM-F225 | ITT Cannon, ... | 27.53 $ | 1000 | CONN D-SUB RCPT 15POS PNL... |
DAMAMT15SNM-F225 | ITT Cannon, ... | 29.4 $ | 1000 | CONN D-SUB RCPT 15POS PNL... |
DBMAM25SNM-F225 | ITT Cannon, ... | 29.44 $ | 1000 | CONN D-SUB RCPT 25POS PNL... |
DBMAMT25SNM-F225 | ITT Cannon, ... | 30.63 $ | 1000 | CONN D-SUB RCPT 25POS PNL... |
DCMAM37PNM-F225 | ITT Cannon, ... | 32.86 $ | 1000 | CONN D-SUB PLUG 37POS PNL... |
DCMAMT37PNM-F225 | ITT Cannon, ... | 34.06 $ | 1000 | CONN D-SUB PLUG 37POS PNL... |
DDMAM78PNM-F225 | ITT Cannon, ... | 74.21 $ | 61 | CONN D-SUB HD PLUG 78POS ... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...