F40J100E

Operating Temperature:	-55°C ~ 350°C
Failure Rate:	--
Package / Case:	Radial, Flat Oval
Lead Style:	Solder Lugs
Height - Seated (Max):	0.563" (14.29mm)
Size / Dimension:	2.000" L x 1.000" W (50.80mm x 25.40mm)
Mounting Feature:	Flange Braces, Right Angle
Coating, Housing Type:	Vitreous Enamel Coated
Features:	--
Series:	Stackohm® 250
Temperature Coefficient:	±260ppm/°C
Composition:	Wirewound
Power (Watts):	40W
Tolerance:	±5%
Resistance:	100 Ohms
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistors play a critical role in electrical engineering. In many electronic circuits, resistors are used to limit current, divide voltages, adjust signal levels, and terminate transmission lines. Chassis mount resistors are one type of resistors available on the market. Specifically, the F40J100E is a surface-mount, square-booting-style chassis mount resistor with excellent tolerance, high-temperature stability and low residual inductance.This type of resistor can be used in a wide range of applications, from automotive electronics to consumer electronics. In automotive electronics, these chassis mount resistors can be used to control airbags, ABS brakes, fuel injectors, lighting systems, and more. In consumer electronics, they are used to adjust the power levels of television sets, monitors, and other electronic productsThe working principle of the F40J100E chassis mount resistor is based on the phenomenon of voltage or current division, where a circuit is made up of two or more resistors which divide a voltage or current across them. For example, the F40J100E chassis mount resistor divides a voltage or current in a circuit according to its resistance. The voltage or current which divides across each resistor is proportional to the resistance of each resistor in the circuit. This is known as Ohm\'s Law. In addition, the total current in the circuit is the same as the sum of the individual currents in the resistors. The F40J100E chassis mount resistor is composed of an active element and a passive element. The active element is a very thin, conducting layer on the surface of the resistor, which is connected to the passive element. When a voltage is applied across the resistor, a current flow occurs, and this causes a voltage drop across the active element. The voltage drop across the active element is proportional to the resistance of the resistor, and this voltage drop is the driving force that moves the current through the circuit. The passive element is typically a metal case which is designed to act as a shield to reduce the effect of external interference and reduce power loss. In summary, the F40J100E chassis mount resistor is a surface-mount, square-booting-style chassis mount resistor with excellent tolerance, high-temperature stability and low residual inductance, which can be used in a wide range of applications. Its operating principle is based on Ohm\'s Law, where a voltage or current divides across two or more resistors in a circuit according to their respective resistance. The voltage drop across each resistor is proportional to its resistance, and the total current in the circuit is the same as the sum of the individual currents in the resistors. The F40J100E is typically composed of an active element and a passive element. The active element is a very thin, conducting layer on the surface of the resistor, which is connected to the passive element which is usually a metal case designed to reduce the effect of external interference and reduce power loss.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description