
Allicdata Part #: | FA-12826.0000MF10P-K5-ND |
Manufacturer Part#: |
FA-128 26.0000MF10P-K5 |
Price: | $ 0.25 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | CRYSTAL 26.00 MHZ 10.0PF SMD |
More Detail: | 26MHz ±10ppm Crystal 10pF 60 Ohms 4-SMD, No Lead |
DataSheet: | ![]() |
Quantity: | 1000 |
3000 +: | $ 0.22838 |
Series: | FA-128 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 26MHz |
Frequency Stability: | ±10ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 10pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.079" L x 0.063" W (2.00mm x 1.60mm) |
Height - Seated (Max): | 0.020" (0.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have long been used in a variety of applications in the electronics industry, including clocks, communication systems, audio and video systems, and many others. The FA-128 26.0000MF10P-K5 is a type of crystal that has found its way into many such applications.
The FA-128 26.0000MF10P-K5 is a quartz or piezoelectric crystal. It consists of a quartz crystal with electrodes mounted on each side to provide electrical connection. The electrodes are usually plated with a silver or gold surface finish to provide a good electrical contact. The crystal is then encapsulated in a protective plastic package, typically with a hermetic seal to prevent moisture from entering.
This type of crystal operates on the principle of electrostriction, which is the phenomenon whereby a crystal expands or contracts when a voltage is applied to it. As the crystal expands and contracts, it vibrates at the frequency of the electrical signal applied to it. This frequency, usually measured in millions of hertz (MHz) is the resonant frequency of the crystal.
The FA-128 26.0000MF10P-K5 is primarily used in radio frequency (RF) applications, such as wireless communications and radio transmitters. It is also used in timing applications where selectable clock frequencies are required. It is also used in other applications where an accurate and precise frequency reference is required, such as digital data converters and clocks.
In radio frequency applications, the crystal acts as a frequency reference for the transmitter or receiver. The crystal is connected to one of the two oscillator circuits at the heart of the radio. This oscillator circuit is driven by a voltage-controlled circuit, and the frequency of the output of the oscillator depends on the frequency of the crystal. The exact frequency of the output of the oscillator and the circuit is determined by the accuracy of the crystal.
In timing applications such as digital data converters, the crystal is used to set the sampling rate of the converter. The sampling rate is the rate at which a digital device converts a continuous analog signal into discrete digital samples. The frequency of the crystal determines the rate at which the samples are taken, and therefore the accuracy of the data conversion.
In addition to the above applications, crystals are also used in clocks and watches, quartz microphones, oscillators, voltage-controlled oscillators and other frequency control circuits.
The FA-128 26.0000MF10P-K5 is a versatile crystal that has found its way into many different types of electronic applications. It is a reliable source of accurate and precise frequency references, and is widely used in many different types of circuits.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...

CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...

CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...

CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...

CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...

CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...
