Allicdata Part #: | FA-20H27.0000MF10V-AC0-ND |
Manufacturer Part#: |
FA-20H 27.0000MF10V-AC0 |
Price: | $ 0.27 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | CRYSTAL SMD |
More Detail: | 27MHz ±10ppm Crystal 9pF 60 Ohms 4-SMD, No Lead |
DataSheet: | FA-20H 27.0000MF10V-AC0 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.24192 |
Series: | FA-20H |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 27MHz |
Frequency Stability: | ±10ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 9pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
FA-20H 27.0000MF10V-AC0 Application Field and Working Principle
Crystals are small devices with a specific set of physical properties that enable them to control electrical energy. The most common application of crystals is in tuning circuits and radio frequency filters.
Crystals are made up of a frequency-determining element and a resonator. The frequency-determining element is most often made of quartz, which is a naturally-formed crystal. The resonator is usually a parallel combination of inductors and capacitors.
The FA-20H 27.0000MF10V-AC0 crystal is a quartz-based crystal oscillator that is used in a variety of applications. It has the capability to provide a precise and accurate control of frequencies, which is important in the areas of telecommunications, accurate measurement, and computing.
Application Field
The FA-20H 27.0000MF10V-ACO crystal can be used in a number of applications, such as in the area of precise timing. It can be used to control the timing and synchronization of devices, such as microprocessors, and can be used to control the frequency of signals transmitted in telecommunications systems. It can also be used in precise measurement applications, such as voltage and current measurements, as well as high-speed data acquisition systems.
Working Principle
The FA-20H 27.0000MF10V-AC0 crystal operates using an electrical resonator, which is made up of two electrically connected quartz plates. The quartz plates are connected to two metal electrodes, which form a capacitor. When an electrical voltage is applied to the quartz plates, a voltage imbalance is created across the plates. This voltage imbalance then creates a voltage distribution across the entire quartz crystal.
The quartz crystal is carefully cut and shaped to form a precise frequency-determining element. The quartz crystal is then put inside a metal case. When an alternating electrical current is applied, the quartz crystal acts to store or release energy in proportion to the frequency of the alternating current. This oscillates back and forth, creating a specific frequency that is used to control the operation of other devices.
Conclusion
The FA-20H 27.0000MF10V-ACO crystal is a quartz-based crystal oscillator that is used in a variety of applications, including in the area of precise timing, telecommunications, and precise measurements. It works by using an electrical resonator, which is made up of two electrically connected quartz plates, and when an alternating electric current is applied, the quartz crystal acts to store or release energy in proportion to the frequency of the alternating current.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...