FA-238 50.0000MA30X-C5

Series:	FA-238
Part Status:	Active
Type:	MHz Crystal
Frequency:	50MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±20ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	40 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.028" (0.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals

Crystals are a type of solid pre-manufactured material which has properties that allow it to be used to achieve various tasks. The FA-238 50.0000MA30X-C5 is a type of crystal and it is used in various applications and its working principle is based on its inherent properties. FA-238 50.0000MA30X-C5 is an advanced type of crystal which is mainly composed of LiNbO₃ (Lithium Niobate). This crystal has a superior degree of uniformity and low-noise characteristics which enables it to be used in a variety of different applications. Its small size makes it suitable for tight spaces and its extremely precise diameter allow for great accuracy when used in precise devices. The most important property of the FA-238 50.0000MA30X-C5 is its application in signal processing. It is used in various fields such as microwave communication, radar signal processing, mobile communications, and crystal filter using micro-strip line topologies. The crystal is also employed in signal timing and control applications to precise timing, frequency control, signal demodulation and so on.The working process of the crystal is based on a piezo-electric effect. The piezo-electric effect means that when an electric field is applied to two opposing surfaces of a crystal material it results in an adaptation of the crystal. When an alternating electrical signal is applied to the opposite electrodes of an MA30, it causes an adaptation of the crystal manifested with a slight displacement of the centre axis of the crystal. This change in center axis is used for the purpose of producing a frequency or timing control signal from the crystal.The identification of the frequency of the applied signal is the first step of the piezo-electric effect. The crystal is serially connected with the electrical input through a capacitor. This energized circuit will then resonate at the frequency described by the parameter of the crystal and allows for the extraction of the frequency of the applied signal. The signal is then used to controlling either the frequency or timing. The frequency of the signal is then modified through the use of a second crystal. This second crystal acts as a filter and shape the input signal so that it lies within the specified operational frequency range of the crystal. A variety of crystals can be used to create various signal characteristics such as bandpass, lowpass and high pass.The signal characteristics can be further improved through the use of various configuration components. These may include amplifiers and filters which allow for greater control and flexibility of the signal. The combination of the crystals and components is essential in any specific application or signal processing.The FA-238 50.0000MA30X-C5 has a wide range of applications, depending on the specific use case. It is often used for example in satellite communication systems, mobile communications, radar signal processing and in the development of filters, mixers, oscillators and receivers. In conclusion, the FA-238 50.0000MA30X-C5 crystal is a versatile piece of technology. Its piezo-electric properties make it suitable for a wide range of applications, both in terms of signal processing and also for controlling frequencies and timing. It can be used in combination with a variety of components in order to achieve the desired results and its small size makes it suitable for use in many tight spaces.

The specific data is subject to PDF, and the above content is for reference