FA1-NESP-PCB-0

Frequency - Max:	4GHz
Insertion Loss:	0.3dB
Mating Cycles:	100
Center Contact Material:	Brass
Operating Temperature:	-40°C ~ 100°C
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Plating:	Gold
Body Finish:	Gold
Body Material:	Brass
Includes:	--
Ingress Protection:	--
Housing Color:	Green, Leaf
Features:	Code E
Number of Ports:	1
Series:	--
Fastening Type:	Locking Ramp
Cable Group:	--
Mounting Feature:	--
Mounting Type:	Board Edge, Cutout; Surface Mount; Through Hole, Right Angle
Impedance:	50 Ohm
Shield Termination:	Solder
Contact Termination:	Solder
Connector Type:	Plug, Male Pin
Connector Style:	SMB, Fakra
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)The FA1-NESP-PCB-0 coaxial connector is a type of RF (Radio Frequency) connector designed for high-frequency applications. It is a compact, highly reliable connector that is widely used in high-frequency communications, such as mobile phones, satellite communications, and aerospace applications. This article provides a detailed overview of the application field and working principle of the FA1-NESP-PCB-0 coaxial connector.Application FieldThe FA1-NESP-PCB-0 coaxial connector is designed for high-frequency applications, such as mobile phones, satellite communications, and aerospace applications. The connector has a wide variety of applications, ranging from low-power, low-frequency communications to high-power, high-frequency microwave communications. The connector is designed to be used in environments with a wide range of frequencies and temperatures. The FA1-NESP-PCB-0 is a highly reliable, compact connector that is well suited for comprehensive high-frequency communication systems.Working PrincipleThe FA1-NESP-PCB-0 coaxial connector uses a female center pin surrounded by a male center pin that is connected to the outer conductor. The center conductor is typically made from brass or copper, with a solid pin or stamped pin configuration. The center pin is protected by a dielectric material, such as PTFE (Polytetrafluoroethylene) or polyester, which provides electrical insulation and helps to improve the RF performance of the connector. The outer conductor consists of a metallic tube that is soldered onto a printed circuit board. The outer conductor is usually made from brass or beryllium copper, with the outer conductor connected to ground. The outer conductor also provides protection from electromagnetic interference (EMI) and improves the overall RF performance of the connector. The FA1-NESP-PCB-0 coaxial connector is designed with an intentional impedance mismatch between the center pin and outer conductor. The impedance mismatch helps to reduce RF interference, such as signal reflections and standing waves, that can degrade the overall performance of the connector. ConclusionThe FA1-NESP-PCB-0 coaxial connector is a compact, highly reliable connector that is designed for high-frequency applications. The connector is well suited for a wide variety of communications systems and provides excellent RF performance. The connector is designed with an intentional impedance mismatch between the center pin and the outer conductor, which helps to reduce signal reflections and standing waves, and improves the performance of the connector.

The specific data is subject to PDF, and the above content is for reference