FAD1-06025CHLW12-A

Power (Watts):	1.20W
Lifetime @ Temp.:	40000 Hrs @ 40°C
Material - Blade:	Plastic
Material - Frame:	Plastic
Voltage Range:	10.8 ~ 13.2VDC
Current Rating:	0.100A
Weight:	0.137 lb (62.14g)
Approvals:	CE, cURus, TUV
Operating Temperature:	14 ~ 158°F (-10 ~ 70°C)
Ingress Protection:	--
Termination:	2 Wire Leads
RPM:	2500 RPM
Series:	FAD1-06025-A
Noise:	18.9 dB(A)
Features:	--
Fan Type:	Tubeaxial
Bearing Type:	Hydrodynamic
Static Pressure:	0.080 in H2O (19.9 Pa)
Air Flow:	12.7 CFM (0.356m³/min)
Width:	25.00mm
Size / Dimension:	Square - 60mm L x 60mm H
Voltage - Rated:	12VDC
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FAD1-06025CHLW12-A is a DC fan, which is widely used in electronic equipment cooling, air conditioning and ventilation of workshops, bathrooms and other electromechanical devices. The working principle of this fan is thermally-induced air pressure regulation.When the fan is turned on, the air around it becomes warmer due to the heat generated by the electric motor. The warm air is lighter than the surrounding cooler air, which creates a lower air pressure. The low pressure area is then filled up by cooler air, which causes the fan to draw in air from outside. The incoming air is then lifted and sent out of the fan towards the outside.The air pressure regulation of FAD1-06025CHLW12-A is accomplished by the use of a fan motor, a ducted fan and a set of blades. The fan motor powers the blades, which spin and generate air pressure. The air pressure created by the blades is then directed into the duct. The duct is designed with a certain cross-sectional area - larger or smaller depending on the desired air flow rate. By adjusting the cross-sectional area of the duct, the fan speed and air flow rate can be adjusted.At the same time, the fan blades also create turbulence inside the fan, which helps the air mix better and increase the air flow rate. As the air enters the fan, it is cooled, facilitating better thermal regulation and improving the air flow rate. The fan blades are also adjustable in order to adjust the air flow rate.Aside from using thermally-induced air pressure regulation, the FAD1-06025CHLW12-A fan can also be used in combination with speed controllers. Increasing the fan speed can help increase the cooling performance of the fan. Speed controllers also help in increasing the energy efficiency of the fan, by adjusting the speed of the fan to match the actual cooling needs.In conclusion, the FAD1-06025CHLW12-A is an effective DC fan, which is used in a variety of applications. The fan uses thermally-induced air pressure regulation, which improves cooling performance and energy efficiency. The fan blades are adjustable, helping further improve cooling performance and air flow rate. Finally, speed controllers can also be used in combination with this fan, allowing for better control and further improving the fan’s efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description