Allicdata Part #: | FAR-F6KA-1G5859-D4MS-Z-ND |
Manufacturer Part#: |
FAR-F6KA-1G5859-D4MS-Z |
Price: | $ 0.16 |
Product Category: | Filters |
Manufacturer: | Taiyo Yuden |
Short Description: | FILTER SAW 1.5859GHZ 5SMD |
More Detail: | N/A |
DataSheet: | FAR-F6KA-1G5859-D4MS-Z Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
3000 +: | $ 0.15120 |
Series: | F6 |
Packaging: | Tape & Reel (TR) |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Frequency - Center: | 1.5859GHz |
Insertion Loss: | 1.2dB |
Ratings: | -- |
Applications: | GPS |
Mounting Type: | Surface Mount |
Package / Case: | 5-SMD, No Lead |
Height (Max): | 0.020" (0.50mm) |
Size / Dimension: | 0.055" L x 0.039" W (1.40mm x 1.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Surface acoustic wave (SAW) filters are devices that are used to pass certain frequencies of electrical signals within the given frequency range while rejecting those outside the range. A SAW filter manufactured by FAR-F6KA-1G5859-D4MS-Z is designed to process high-frequency signals, usually up to 6GHz. It has a low insertion loss, low groupdelay ripple and superior RF rejection, and is an ideal choice for a variety of communication receiver applications.
A SAW filter typically consists of two components: a transmitting transducer and a receiving transducer that are positioned next to each other. When a signal enters the filter, it is converted into an acoustic wave by the transmitting transducer and transmitted along the thin surface acoustic wave (SAW) propagation medium. This SAW propagates towards the receiving transducer, where it is converted back to an electrical signal.
The frequency response of the SAW filter is determined by its resonator design; the number of SAW resonators, their length, and the width of the SAW propagation medium, among other considerations. The isolation at a particular frequency is dependent upon the number of SAW elements, the surface area of the elements, and the distance between the transmitting and receiving transducers.
The FAR-F6KA-1G5859-D4MS-Z SAW filter is fabricated on a PTFE/Ceramic substrate, and is designed for selective filtering with a bandwidth of 0.1GHz. This filter is capable of rejecting spurrrrrs up to 60dB minimum, which makes it particularly suitable for applications requiring tight frequency selectivity. The SAW filter also has a low insertion loss and excellent self-match capabilities, making it suitable for use in narrow bandwidth applications.
The FAR-F6KA-1G5859-D4MS-Z SAW filter can be used in a variety of applications, such as cellular base station duplexers, high power filters and GPS signal receivers. It is also well-suited for Bluetooth, Wi-Fi, and ZigBee applications where low loss and high isolation are critical. The filter can also be used in RF test and measurement equipment, radar systems, GPS receivers, and military radio systems.
The FAR-F6KA-1G5859-D4MS-Z SAW filter offers reliable performance and makes an ideal choice for high-performance filtering applications. Its low insertion loss and high rejection levels make it suitable for use in a variety of applications where frequency selectivity is critical. This filter also provides high power handling, making it suitable for use in high power applications.
The specific data is subject to PDF, and the above content is for reference
FILTER SAW 73.5996MHZ 10SMD
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW