FAR-F6KA-1G8425-D4CK-Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW (Surface Acoustic Wave) filters are devices that are commonly used in wireless communication systems. They are used to filter out any unwanted radio frequency signals in order to ensure the signal integrity of the radio frequency (RF) signals. The SAW filters are designed to reject high frequency components of an incoming RF signal and pass through only the wanted frequencies.

The FAR-F6KA-1G8425-D4CK-Z is a SAW filter that operates at a frequency of 8.42GHz. It is used in applications that require high-frequency signals from a specific bandwidth. TheS filter is designed to have a bandwidth of 1GHz and reject frequencies outside the bandwidth of -35dB to -100dB. This ensures that only the signal within the specified bandwidth is passed through and unwanted noise and signals are suppressed.

The filter is designed to operate in two ways. The first is the low-pass filter (LPF) mode, which means that it passes the lower frequency signals and inhibits higher frequency signals. This is useful in applications where only low-frequency signals are desired. The second mode is the high-pass filter (HPF) mode, which means that it passes the higher frequency signals and inhibits lower frequency signals. This is useful in applications where only high-frequency signals are desired. The filter can be switched between the two modes depending on the application.

The SAW filter is made up of two layers of electrodes which are composed of piezoelectric materials. The first layer is the input transducer which converts an incoming RF signal into an acoustic wave. The second layer is the output transducer which converts the acoustic wave back into an electrical signal. The two transducers are separated by a dielectric material which helps suppress unwanted frequencies and maintain the signal integrity.

The filter works by allowing only the wanted frequencies to pass through the two transducers while suppressing the undesired frequencies. This is done by using the physical properties of the piezoelectric materials. The piezoelectric material has a stiffness which varies based on the incoming frequency. As the frequency increases, the stiffness increases, leading to resonant conditions in the filter which reject the higher frequencies. As the frequency decreases, the stiffness decreases, leading to an increase in the allowed frequency range.

The FAR-F6KA-1G8425-D4CK-Z SAW filter offers excellent performance in both LPF and HPF modes, providing excellent signal integrity. It is an ideal choice for applications that require high-frequency signals from a specific bandwidth. With its high rejection levels and low insertion loss, the FAR-F6KA-1G8425-D4CK-Z is an excellent choice for wireless communication systems that require reliable signal quality.

The specific data is subject to PDF, and the above content is for reference