FAR-F6KA-2G4500-A4VD-Z Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) Filters have grown in popularity and utility for a variety of different applications as the technology grows in complexity and precision. The FAR-F6KA-2G4500-A4VD-Z is a specific SAW filter that is used in many areas, and this article will explain the application field of the filter and its working principle.

FAR-F6KA-2G4500-A4VD-Z is a SAW filter that has a center frequency of 2GHz and an insertion loss of 1dB. It is a surface-acoustic wave device and is typically used for selectivity in a variety of radio frequency applications. The filter has a wide range of applications, ranging from mobile telephone systems to automotive radar systems.

The FAR-F6KA-2G4500-A4VD-Z filter is most commonly used in mobile communications. It is the perfect filter for those applications that require low insertion loss, high out-of-band rejection, and a wide operating temperature range. The filter is also suitable for consumer electronic products, such as set-top boxes, television receivers, and cordless telephones.

The working principle of this SAW filter is quite simple. It operates on the principle of frequency conversion and transduction. A thin layer of piezoelectric material, such as quartz or lithium tantalate, is used to convert audio signals into acoustic vibrations, which are then sent through the filter.

The FAR-F6KA-2G4500-A4VD-Z filter is constructed with two electrodes on each side of the piezoelectric material. The electrodes control the oscillations that are created in the material, allowing the user to select frequencies that then pass through the filter. This process causes a frequency-dependent amplitude, which allows for the specific frequencies to be filtered out, leaving only the desired frequencies to pass through the filter.

The FAR-F6KA-2G4500-A4VD-Z filter is also constructed with a low impedance and low voltage, allowing it to provide the desired signal while using less energy than traditional filters. This makes it an ideal choice for many battery powered applications. The filter is also designed with a low resonance frequency and low harmonic generation, ensuring that it is well suited for use in high frequency circuits.

In conclusion, the FAR-F6KA-2G4500-A4VD-Z filter is a SAW filter that is used in a variety of applications, from mobile communication to consumer electronics. It operates on the principle of frequency conversion and transduction, and is constructed with two electrodes on each side of the piezoelectric material. The filter is designed with a low impedance and low voltage for use in battery powered applications, and is noted for its low insertion loss, high out-of-band rejection, and wide operating temperature range.

The specific data is subject to PDF, and the above content is for reference