FB-EI-30026-000

Frequency Range:	300Hz ~ 4.7kHz
Shape:	Circular
Height (Max):	0.300" (7.62mm)
Size / Dimension:	0.709" Dia (18.00mm)
Termination:	Wire Leads
Port Location:	Side
Impedance:	300 Ohms
S/N Ratio:	--
Sensitivity:	-87dB ±5dB @ 74dB SPL
Series:	FB-EI
Direction:	Noise Cancelling
Output Type:	Analog
Type:	Boom
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FB-EI-30026-000 is a type of microphone that is used in home recording and in live sound reinforcement. It is commonly used by musicians for vocal performance as well as recording acoustic instruments. The microphone is designed to capture sound accurately and precisely, and is popular due to its low cost.The FB-EI-30026-000 is a dynamic microphone, meaning that it is designed to operate without electrical amplification. It uses a coil and magnet to convert sound into electrical signals. A diaphragm attached to the coil vibrates in response to sound, which in turn causes the coil to move and generate an electrical signal. This signal is then sent to an audio device, such as an amplifier or computer.The FB-EI-30026-000 is designed to capture sound in a wide frequency range, from 50 Hz to 15 kHz. This means that it can accurately reproduce all sound sources, from the lowest sub-bass to the highest highs. It also has a high signal-to-noise ratio, meaning that it produces less noise than other microphones in its price range. Additionally, the FB-EI-30026-000 is designed for low handling noise, meaning that it will not pick up unwanted noise when it is moved or handled.The FB-EI-30026-000 has a number of uses. In home recording, it can be used to capture vocals or acoustic instruments. In live sound reinforcement, it can be used to mike up a singer or instrument amplifier. It is also popular for podcasting, voiceover work and studio recording.As with all microphones, the FB-EI-30026-000 needs to be connected to an audio device in order to work. The connection is usually made via an XLR cable, which is a three-pin connector. The microphone is plugged into one end of the cable, while the other end is connected to the audio device. It is important to make sure that the levels are properly adjusted before recording, as a loud signal can clip and distort the sound.In conclusion, the FB-EI-30026-000 is a popular and affordable microphone which is suitable for a variety of applications. It is designed to capture sound accurately and precisely, and has a wide frequency response and low noise. It is connected to an audio device via an XLR cable, and needs to be properly set up before recording. The FB-EI-30026-000 is an effective and reliable choice for any recording or live sound reinforcement applications.

The specific data is subject to PDF, and the above content is for reference