FBA04HA450KG-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips are passive components used in many different electronic applications. They are used to suppress interference, reduce noise and increase signal integrity. They are also used to protect sensitive components from damage due to electrostatic discharge. The FBA04HA450KG-00 is a ferrite bead which is used in Ethernet applications.

The FBA04HA450KG-00 is an SMT or surface mount ferrite bead. It is designed to reduce Electromagnetic Interference (EMI) within Ethernet connections. This is especially important in signal-sensitive Ethernet applications where data rates are high and signal integrity is essential.

The FBA04HA450KG-00 has a typical impedance of 450 Ohms. It has a very low self-capacitance of 1pF and a high self-resistance of 400K Ohms. This helps to reduce noise and increase signal integrity. It has an operating temperature range of -55° C to +125° C and a maximum operating current of 15A.

The FBA04HA450KG-00 works by blocking any noise which is in the same frequency range as the signal. It does this by presenting a high impedance to the noise, which in turn reduces the amount of noise which is transmitted. This helps to preserve signal integrity in Ethernet applications.

The FBA04HA450KG-00 is widely used in Ethernet-based systems, such as industrial control systems, robotics, networking equipment, and audio/video systems. It is also suitable for Automotive Ethernet systems, Industrial Ethernet networks, Carrier Ethernet switches, and Networks over Coaxial Cable (NOC).

The FBA04HA450KG-00 can be used in both single-ended and differential applications. It is designed with high insertion loss so that it can reduce noise without reducing the signal’s strength significantly. The insertion loss is typically lower than 3dB at the frequencies used in Ethernet applications, such as 10MHz to 2.5GHz.

The FBA04HA450KG-00 is available in a standard 0805 package, or in an axial package. It can be mounted on a standard circuit board and soldered in place. It is also RoHS compliant which makes it safe for use in sensitive electronic applications.

In conclusion, the FBA04HA450KG-00 ferrite bead is an effective EMI suppression device for Ethernet applications. It helps to reduce noise and increase signal integrity without significantly reducing the signal strength. It is designed to be used in single-ended or differential applications, and is available in an SMT or axial package.

The specific data is subject to PDF, and the above content is for reference